Cisco Pix help

[grandmaster]

Hello peeps long time no post etc.

Has anyone ever managed to set up a cisco PIX 513 on a virgn connection through an STB?
If so any chance you could post your config minus ip's and passwords etc..
I'm having trouble getting mine to work.

Ryan

[gazzae]

Not using cable but ADSL... Should be somewhat similar though...
That said this is set up for a connection with Static IPs

Building configuration...
: Saved
:
PIX Version 6.3(1)
interface ethernet0 auto
interface ethernet1 100full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password **** encrypted
passwd ****** encrypted
hostname *****bangor
domain-name ******.co.uk
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol ils 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
names
name 192.168.1.0 wales
pager lines 24
logging on
mtu outside 1500
mtu inside 1500
ip address outside ***.***.5.98 255.255.255.0
ip address inside 192.84.7.99 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
pdm location wales 255.255.255.0 outside
pdm logging informational 100
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
route outside 0.0.0.0 0.0.0.0 ***.***.5.97 1
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
http server enable
http 192.84.7.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
isakmp enable outside
isakmp policy 20 authentication pre-share
isakmp policy 20 encryption 3des
isakmp policy 20 hash md5
isakmp policy 20 group 2
isakmp policy 20 lifetime 86400
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd address 192.84.7.100-192.84.7.131 inside
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd auto_config outside
terminal width 80
Cryptochecksum:******
: end
[OK]

[grandmaster]

Thank you for your reply sir..
I shall look over the config later when i get home.
I think the dhcp command is :
ip address outside dhcpd setroute

Or something like that.. I have not played with a cisco for a number of years and managed to get my mits on this one so thought I would dip my toe back in.

If anyone knows a way to spoof the mac address so its the same as my router (should not have to deal with the NTL REG page then) I would be most grateful!