Brighton Slow Again - Page 6

General Maximus · 05-03-2012, 20:03

he shouldnt have a shub, he is on 10mbit.

Type 192.168.100.1 in your browser and when it asks for a password it is "root". You need to copy and paste the downstream, upstream and configuration info.

db133 · 05-03-2012, 20:08

Quote:

Originally Posted by qasdfdsaq

He's clearly incapable of opening a web page. Leave him be.

So kind, what goes round comes round.

qasdfdsaq · 05-03-2012, 20:10

Quote:

Originally Posted by db133

So kind, what goes round comes round.

So tell me, after 6 pages of moaning, have you actually managed to check your line stats then?

db133 · 05-03-2012, 20:12

Quote:

Originally Posted by General Maximus

he shouldnt have a shub, he is on 10mbit.

Type 192.168.100.1 in your browser and when it asks for a password it is "root". You need to copy and paste the downstream, upstream and configuration info.

That worked:

Cable Modem Downstream
Downstream Lock : Locked
Downstream Channel Id : 2
Downstream Frequency : 586750000 Hz
Downstream Modulation : QAM64
Downstream Symbol Rate : 6952 Ksym/sec
Downstream Interleave Depth : taps12Increment17
Downstream Receive Power Level : -4.0 dBmV
Downstream SNR : 34.1 dB

Cable Modem Upstream
Upstream Lock : Locked
Upstream Channel ID : 2
Upstream Frequency : 40800000 Hz
Upstream Modulation : QAM16
Upstream Symbol Rate : 2560 Ksym/sec
Upstream transmit Power Level : 36.0 dBmV
Upstream Mini-Slot Size : 2

General Maximus · 05-03-2012, 20:12

Quote:

Originally Posted by db133

So kind, what goes round comes round.

instead of making flippant remarks all the time and further annoying people who are trying to help you why dont you just try and help us help you get to the bottom of your problem so you can stop bitching about it

thenry · 05-03-2012, 20:13

remove your MAC address/serial

Andrewcrawford23 · 05-03-2012, 20:13

Quote:

Originally Posted by db133

That worked:

Cable Modem Information
Cable Modem : Euro-DOCSIS 1.0/1.1/2.0 Compliant
MAC Address :
Serial Number :
Boot Code Version : 3.1.6d
Software Version : 2.94.1015
Hardware Version : 1.19

go to signal and post that

General Maximus · 05-03-2012, 20:14

Quote:

Originally Posted by db133

That worked:

Cable Modem Information
Cable Modem : Euro-DOCSIS 1.0/1.1/2.0 Compliant
MAC Address : <hidden>
Serial Number : <hidden>
Boot Code Version : 3.1.6d
Software Version : 2.94.1015
Hardware Version : 1.19

delete your mac address and serial number and post the info we asked for. I might be paranoid but I am thinking you are doing this to annoy us. Last week you told somebody they needed to change their mtu size on the shub which made me think you knew what you was talking about.

Andrewcrawford23 · 05-03-2012, 20:14

general delete it form yoru quite as well

db133 · 05-03-2012, 20:24

Quote:

Originally Posted by qasdfdsaq

So tell me, after 6 pages of moaning, have you actually managed to check your line stats then?

No not until Maximus was kind enough to show me how.

General Maximus · 05-03-2012, 20:24

where do you live. I cant believe you are on QAM64 and QAM16. Anyways, your downstream power and SNR are low which is probably what is causing your rubbish speed all the time.

Andrewcrawford23 · 05-03-2012, 20:27

downstream power levle is ok, could be a bit higher and closer to 0 but it should work fine liek that, snr is borderline but i think since it qam64 it can be a low as 30 it lower than qam256

upstream power levle is little ont eh low side to

thenry · 05-03-2012, 20:27

hes in legendary crap brighton

General Maximus · 05-03-2012, 20:29

doh! should have read that.

double doh! because upstream is QAM16. I thought mine was QAM64 for some reason.

Forgetting the student problem everyone is harping on about, you would have thought that if VM knew the area was over congested they would have made the uplift work a priority and got everyone on QAM256.

db133 · 05-03-2012, 20:37

Quote:

Originally Posted by General Maximus

delete your mac address and serial number and post the info we asked for. I might be paranoid but I am thinking you are doing this to annoy us. Last week you told somebody they needed to change their mtu size on the shub which made me think you knew what you was talking about.

I am not trying to annoy anyone.

I did not tell anyone 'they needed to change their 'mtu' what ever that is.

---------- Post added at 20:36 ---------- Previous post was at 20:30 ----------

Quote:

Originally Posted by General Maximus

instead of making flippant remarks all the time and further annoying people who are trying to help you why dont you just try and help us help you get to the bottom of your problem so you can stop bitching about it

Fair point but 'flippant remarks all the time' is a little ott.

So its all right to put "He's clearly incapable of opening a web page. Leave him be."

But its not alright to respond with 'So kind what goes round comes round'

It is ok to be bitching about someone bitching then ?

---------- Post added at 20:37 ---------- Previous post was at 20:36 ----------

Quote:

Originally Posted by thenry

hes in legendary crap brighton

But why is that ?