Ordered my self-install kit
06-08-2014, 17:28
|
#1
|
Inactive
Join Date: Mar 2004
Services: BB:M, TV:XL, Phone:M, Loyalty
Posts: 2,516
|
Ordered my self-install kit
Ready for 50Mb - prompted to move it along as my speed has been taking a bit of a dive.
Signal is down to -10.5dBm - and that's AFTER I took off the 3dB attenuator.
Is the Superhub going to run with that?
I suppose I could have gone for a manned install, but that way I'd be paying for my own service call.
|
|
|
06-08-2014, 17:43
|
#2
|
Sad Doig Fan!
Join Date: Aug 2007
Location: Barry South Wales
Age: 68
Services: With VM for BB 250Mb service.(Deal)
Posts: 11,660
|
Re: Ordered my self-install kit
Why remove the attenuator?
|
|
|
06-08-2014, 19:30
|
#3
|
FORMER Virgin Media Staff
Join Date: Dec 2010
Location: Warrington
Posts: 4,737
|
Re: Ordered my self-install kit
Quote:
Originally Posted by Matth
Ready for 50Mb - prompted to move it along as my speed has been taking a bit of a dive.
Signal is down to -10.5dBm - and that's AFTER I took off the 3dB attenuator.
Is the Superhub going to run with that?
I suppose I could have gone for a manned install, but that way I'd be paying for my own service call.
|
That's definitely out of the ideal range, should be as close to 0 as possible. Are you having issues? If so, ring up and they'll send out a fault tech to fix it (no charge).
|
|
|
06-08-2014, 19:43
|
#4
|
Ran Away
Join Date: Nov 2008
Location: Lincoln
Services: phone + 1gbit BB + SkyQ
Posts: 11,021
|
Re: Ordered my self-install kit
yeah, I would install the shub and then ring up and tell them it is online but speed is pants and all over the place and that your power levels are way out. They'll send someone out to fix it.
|
|
|
06-08-2014, 23:15
|
#5
|
Inactive
Join Date: Mar 2004
Services: BB:M, TV:XL, Phone:M, Loyalty
Posts: 2,516
|
Re: Ordered my self-install kit
Quote:
Originally Posted by pip08456
Why remove the attenuator?
|
It was -12 something before that.
I seem to remember though that the general advice is not to get too worried about levels unless it's actually giving problems - might find the old modem is degraded somehow, and the SHUB will report happier figures - I think the modem was reporting a little low after they put the attenuator on (tested after the STB was replaced).
As for speeds, my M20 seems to have fallen to 5, and no, I haven't been bashing it hard enough to hit STM - reset the modem, and another speedtest peaked 10 before settling to 5 - maybe the old QAM64 I'm on is just not getting a fair share any more.
PS. I'll see if the SHUB does ok in router mode, as my router is only a basic N150. If not, there's always modem mode...
|
|
|
07-08-2014, 00:35
|
#6
|
Sad Doig Fan!
Join Date: Aug 2007
Location: Barry South Wales
Age: 68
Services: With VM for BB 250Mb service.(Deal)
Posts: 11,660
|
Re: Ordered my self-install kit
The attenuator should've reduced it (if it's a forward path attenuator).
|
|
|
07-08-2014, 18:53
|
#7
|
cf.addict
Join Date: Mar 2007
Location: West Midlands
Services: Telewest Stuff
Posts: 241
|
Re: Ordered my self-install kit
Quote:
Originally Posted by pip08456
The attenuator should've reduced it (if it's a forward path attenuator).
|
Err yes it did reduce it
If you read his post again it was -12 with the attenuator fitted and -10 when removed.
That is kind of an increase in signal there by 2db
|
|
|
07-08-2014, 19:52
|
#8
|
Ran Away
Join Date: Nov 2008
Location: Lincoln
Services: phone + 1gbit BB + SkyQ
Posts: 11,021
|
Re: Ordered my self-install kit
I thought the same thing, I went downstairs to get tea and when I came back I had 4 emails with new posts from 4 different threads.
|
|
|
07-08-2014, 20:07
|
#9
|
Inactive
Join Date: Mar 2004
Services: BB:M, TV:XL, Phone:M, Loyalty
Posts: 2,516
|
Re: Ordered my self-install kit
Now it's -8.5 and 34.5dB SNR - I did see someone at the box the other day, maybe there was an overall adjustment of levels.
Speedtest.net hovers around 10 - I always used to bang the needle on 20 without fail - maybe everyone that hasn't been upgraded are all being dumped on this QAM64.
|
|
|
07-08-2014, 20:25
|
#10
|
Ran Away
Join Date: Nov 2008
Location: Lincoln
Services: phone + 1gbit BB + SkyQ
Posts: 11,021
|
Re: Ordered my self-install kit
na, qam64 is for the upstream and if anything it is good because it means your power levels have to be even tighter (i.e. networks has to keep everything well within spec). You need to get a tech out and get them to move your tap point.
|
|
|
07-08-2014, 23:48
|
#11
|
Inactive
Join Date: Mar 2004
Services: BB:M, TV:XL, Phone:M, Loyalty
Posts: 2,516
|
Re: Ordered my self-install kit
Would the modem log errors, or just slow down?
PS. Blam straight up to 20 when I selected a different test server a bit further away - guess the ones close to London may be congested.
I'll see what levels the SHUB reports.
My downstream is QAM64 - maybe a legacy from originally being on STB
Cable Modem DownstreamDownstream Lock : LockedDownstream Channel Id : 5Downstream Frequency : 586750000 HzDownstream Modulation : QAM64Downstream Symbol Rate : 6952 Ksym/secDownstream Interleave Depth : taps12Increment17Downstream Receive Power Level : -10.7 dBmVDownstream SNR : 32.2 dB
|
|
|
08-08-2014, 05:36
|
#12
|
cf.mega poster
Join Date: Aug 2009
Posts: 5,386
|
Re: Ordered my self-install kit
you need a tech, snr is pants too
|
|
|
08-08-2014, 09:16
|
#13
|
Ran Away
Join Date: Nov 2008
Location: Lincoln
Services: phone + 1gbit BB + SkyQ
Posts: 11,021
|
Re: Ordered my self-install kit
you defo need to get that looked at because I was under the impression that as of last year there weren't any areas on qam64 and everyone was not on qam256
|
|
|
08-08-2014, 10:35
|
#14
|
FORMER Virgin Media Staff
Join Date: Dec 2010
Location: Warrington
Posts: 4,737
|
Re: Ordered my self-install kit
yeah seriously, in the time this thread was posted, a tech could have been and gone by now and the issue sorted.
|
|
|
09-08-2014, 01:18
|
#15
|
Sad Doig Fan!
Join Date: Aug 2007
Location: Barry South Wales
Age: 68
Services: With VM for BB 250Mb service.(Deal)
Posts: 11,660
|
Re: Ordered my self-install kit
Quite correct Kush.
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT +1. The time now is 14:27.
|