50M : any problems ng19 ?

[blaupunkt]

hi my net keeps dropping been doing it for about the last 20mins or so, i have to power down the modem and router then it will reconnect for a few minutes before dropping again.

any ideas ?

[General Maximus]

nope, but when that has happened to me in the past it has only ever last 4 hours or so before they fix whatever is wrong. If you are still having probs now post your power levels and we'll take a look. Normally stuff like that is a problem with upstream power on the network.

[blaupunkt]

Hi thanks for the reply, i just turned the PC off last night and watched a film, seems ok this morning.

where do i get the info for power levels for future reference ?

---------- Post added at 10:49 ---------- Previous post was at 10:28 ----------

i found it, my modem is the VMNG300



Frequency 307000000 291000000 299000000 315000000
Lock Status
(QAM Lock/FEC Sync/MPEG Lock) Y/Y/Y Y/Y/Y Y/Y/Y Y/Y/Y
Channel Id 199 197 198 200
Modulation 256QAM 256QAM 256QAM 256QAM
Symbol Rate
(Msym/sec) 6.952 6.952 6.952 6.952
Interleave Depth I=12
J=17 I=12
J=17 I=12
J=17 I=12
J=17
Power Level
(dBmV) 9.91 10.67 10.10 9.92
RxMER
(dB) 38.26 37.94 37.94 38.26
Correctable
Codewords 114 142 150 123
Uncorrectable
Codewords 415 952 393 1061

[Andrewcrawford23]

Originally Posted by blaupunkt

Hi thanks for the reply, i just turned the PC off last night and watched a film, seems ok this morning.

where do i get the info for power levels for future reference ?

---------- Post added at 10:49 ---------- Previous post was at 10:28 ----------

i found it, my modem is the VMNG300



Frequency 307000000 291000000 299000000 315000000
Lock Status
(QAM Lock/FEC Sync/MPEG Lock) Y/Y/Y Y/Y/Y Y/Y/Y Y/Y/Y
Channel Id 199 197 198 200
Modulation 256QAM 256QAM 256QAM 256QAM
Symbol Rate
(Msym/sec) 6.952 6.952 6.952 6.952
Interleave Depth I=12
J=17 I=12
J=17 I=12
J=17 I=12
J=17
Power Level
(dBmV) 9.91 10.67 10.10 9.92
RxMER
(dB) 38.26 37.94 37.94 38.26
Correctable
Codewords 114 142 150 123
Uncorrectable
Codewords 415 952 393 1061

downstream power levle is little high

post yoru upstream power levle to

[General Maximus]

Yeah, you defo need to be giving them a call about that otherwise you'll continue to suffer from intermittent faults

[craigj2k12]

the VMNG cant cope with anything above 6 (? - could be 8, correct me if im wrong) so no wonder your having issues

[blaupunkt]

hi thanks for the reply, heres the upstream

Channel Type 2.0 N/A N/A N/A
Channel ID 1 N/A N/A N/A
Frequency
(Hz) 45800000 N/A N/A N/A
Ranging Status Success N/A N/A N/A
Modulation 16QAM N/A N/A N/A
Symbol Rate
(KSym/sec) 5120 N/A N/A N/A
Mini-Slot Size 4 N/A N/A N/A
Power Level
(dBmV) 42.00 N/A N/A N/A
T1 Timeouts 0 0 0 0
T2 Timeouts 0 0 0 0
T3 Timeouts 0 0 0 0
T4 Timeouts 0 0 0 0

[General Maximus]

that's good, it is your downstream that is causing you the probs

[blaupunkt]

ok thanks, is it best to say i its the downstream when i phone or just say it keep dropping the connection ?

---------- Post added at 11:55 ---------- Previous post was at 11:21 ----------

OK just phoned 150, they said there is no fault on the modem and then sent a signal down to reset the router and my modem, the guy on the other end said this will fix my problems ?

[General Maximus]

he is talking out of his bum, all he has done is a remote reboot of the modem which is no different that you unplugging it and plugging it back in again. Ring them back and tell them your downstream power is too high which is causing your connection to drop and you want someone out to fix it. The plebs in India won't know what you are talking about. If you are online atm they'll think everything is alright and fob you off with sopme rubbish. You might need to ring back tomorrow morning around 8 and hopefully you'll get to speak to someone in the UK,

[qasdfdsaq]

Originally Posted by blaupunkt

OK just phoned 150, they said there is no fault on the modem and then sent a signal down to reset the router and my modem, the guy on the other end said this will fix my problems ?

Haha I had that once too. "Sending signals". Quite the joy.

[blaupunkt]

thanks for the help guys i have someone coming out tomorrow, the guy on the other end of the phone this morning was adamant that there was nothing wrong with modem and that there was nothing wrong with the downstream power levels.

anyway at least i have someone coming out to take a look and hopefully replace the modem!

[Andrewcrawford23]

Originally Posted by craigj2k12

the VMNG cant cope with anything above 6 (? - could be 8, correct me if im wrong) so no wonder your having issues

i think vmng300 can work comfortable between -7 and 8 but mines is currently working at -9 and prior to that it was workign at 8

---------- Post added at 19:58 ---------- Previous post was at 19:57 ----------

Originally Posted by blaupunkt

thanks for the help guys i have someone coming out tomorrow, the guy on the other end of the phone this morning was adamant that there was nothing wrong with modem and that there was nothing wrong with the downstream power levels.

anyway at least i have someone coming out to take a look and hopefully replace the modem!

modme shouldnt be replaced, it requires a attenutor fitted onto the modem to bring th epower levles down, oh the agent you spoek too is wrong anything over 8 and cusotmer having conenciton problems a tech should be booked without querries

[blaupunkt]

well as long as its fixed im not going to complain, cannot even watch GW2 footage on youtube tonight its stuttering that bad!

[General Maximus]

the important thing is that an engineer is coming. Tell him you have had a look at your power levels and they are dodgy and hopefully he'll do the same then fix it. Don't let them fob you off with just swapping out the modem because that won't fix the problem. Fitting an attenuator is a 30 second job and will fix it straight away.