B&Q Satellite - Ross freesat box and dish
05-12-2010, 11:02
|
#286
|
Inactive
Join Date: Dec 2010
Location: Eltham, London
Posts: 6
|
Re: B&Q Satellite - Ross freesat box and dish
I know it is probably best to attach dishes to nice firm brick walls but I would prefer to hide the dishes at the rear of my house but that would mean a pole of some kind attached to the rear wall. Is this going to work attaching a sat dish to a pole? Will probably have the TV aerial attached at top of pole to as need to put that up to .
Any ideas on where I can get a reasonably priced pole and correct wall attachments?
|
|
|
09-12-2010, 13:33
|
#287
|
Inactive
Join Date: Dec 2010
Posts: 1
|
Re: B&Q Satellite - Ross freesat box and dish
Hi Folks
Can any one help?
I have just purchased a Ross system that was supplied with the HDR8130USB receiver.
I have followed the procedures for installing BBC 1 HD as per MTJR post 11/11/2010.
The screen tells me it has found 3 new channels one of the being BBC 1 HD at location 0067, but when I go to that channel it is not there and is something like klicks which appears to be a music/children program?
I have also been through all the channel listings and cannot find it?
Thanks
|
|
|
08-01-2011, 16:31
|
#288
|
Inactive
Join Date: Jan 2011
Posts: 4
|
Re: B&Q Satellite - Ross freesat box and dish
Hi - I am new to the forum and to satellite TV - just been given the Ross HD system as a present, have managed to set it up and find the satellite with a meter (never new there were so many satellites in that part of the sky!!). System worked fine for a few days but then whilst we were watching one day we lost picture and the signal has dropped to 20% and the quality levels have dropped to 0%. Have checked the box, connections and dish, nothing obvious so cannot work out why the levels have dropped. I am wondereing if the LNB is faulty?
The other factor is when I reconected the signal meter, the meter shows full strength signal but will not adjust when the dish is moved, this may sound odd but the audible signal from the meter sounds different too.
Does anyone have any ideas?
Thanks - Tony
|
|
|
08-01-2011, 16:34
|
#289
|
Trollsplatter
Cable Forum Team
Join Date: Jun 2003
Location: North of Watford
Services: Humane elimination of all common Internet pests
Posts: 37,045
|
Re: B&Q Satellite - Ross freesat box and dish
Could you clarify please, what happened when you put the sat finder back onto the system?
|
|
|
08-01-2011, 16:40
|
#290
|
Inactive
Join Date: Jan 2011
Posts: 4
|
Re: B&Q Satellite - Ross freesat box and dish
Hi Chris - the meter showed full strength and would not reduce when adjusting the level control. The signal audible pitch also seemed different, so regardless of where the dish was pointed or the setting on the level control adjusted the meter reading remained the same (at max).
There was no change in weather, no visible obstructions, and I ensured that the meter was behind the dish when looking to make the adjustments.
Thanks
Tony
|
|
|
08-01-2011, 16:51
|
#291
|
Trollsplatter
Cable Forum Team
Join Date: Jun 2003
Location: North of Watford
Services: Humane elimination of all common Internet pests
Posts: 37,045
|
Re: B&Q Satellite - Ross freesat box and dish
Well, if your LNB is duff, the sat finder isn't going to get anything useful from it. In the absence of any detectable signal, a sat finder is liable to just collect background noise, which is probably what it's now reading back to you. I would say the fact the rig stopped working some time after the initial set-up went ok is all the diagnosis you need. Back to B&Q with that LNB ...
|
|
|
08-01-2011, 16:58
|
#292
|
Inactive
Join Date: Jan 2011
Posts: 4
|
Re: B&Q Satellite - Ross freesat box and dish
Thanks Chris - I will let the forum know how I get on
Tony
|
|
|
08-01-2011, 20:47
|
#293
|
Inactive
Join Date: Jan 2011
Posts: 3
|
Re: B&Q Satellite - Ross freesat box and dish
Hello all.
Today I purchased the HD kit from my local B & Q for a (non technical) chum who has been desiring to make use of his High Def' Samsung Television. HD Freeview not available here until the end of 2012
I tested the Set-Top box with my existing equipment. It worked fine.
I then tested the LNB. It worked fine.
The total number of programmes was over 360.
When I took it to my chum, we made up the dish and LNB assembly, then tested the system.
I took the dish assembly into the garden with a clear line of sight to 28 degrees West.
The Signal strength indicated 99%, and Quality 0% wherever I pointed the dish assembly (even with my hand covering the LNB).
I am fully aware of the accuracy required to receive signals emanating from the 'Birds' in the 'Clarke Belt'.
My chum and his wife were not impressed, my wife and I had already told them it worked well when I checked it at home.
Removing the feed-line, caused the signal strength to drop to about 20% ( I assume noise level).
I left my compass at home, so was unable to set the correct angle. I use about 154 degrees magnetic.
With my Lidl Silvercrest system, the signal strength drops when I move the dish, or put my hand over the LNB.
To have a problem so soon after purchase is disappointing.
Has anyone else had this happen?
Tomorrow (Sunday 8th) I will return with compass, my Feedline, LNB, and Set-Top Box.
Then we will fix the dish assembly to a suitable permanent mount, and try again.
As the system was purchased as a kit, if one item (e.g. LNB or Set-Top box) is defective, the whole kit will have to be dis-assembled and replaced?
With my LIDL system, all the items were separate, therefore simple to replace.
This could bring shame upon me from my chum (and especially his wife), if this is the case.
I'll update tomorrow as to how we get on.
Kind regards James
|
|
|
09-01-2011, 15:20
|
#294
|
Inactive
Join Date: Jan 2011
Posts: 3
|
Re: B&Q Satellite - Ross freesat box and dish
Hello again.
As promised, here is the update.
My chum was so keen to get the job done, he fixed the dish assembly, and drilled a hole in the wall to pass the cable through to the lounge, shortly after sunrise.
By the time I got there, all I had to do was tweak the dish, and prove the system.
I connected my Silvercrest Box and LNB and cable, to find the 'Bird' at 28 degrees.
A Sat-Finder reduces the time spent searching, as it responds quicker than the Box when aligning.
Eventually I got a suitably strong enough signal. Then I swapped items one by one.
The Signal Strength indicator of the Ross Box works differently to my Silvercrest, so my previous worry was negated.
Basically, all my chum has to do now, is firmly screw down the dish mount, and tweak the alignment for the weaker transponders, to improve the quality of signals.
All in all, a successful outcome.
Hope this has been useful to others considering purchasing one?
Regards James
|
|
|
09-01-2011, 15:23
|
#295
|
Trollsplatter
Cable Forum Team
Join Date: Jun 2003
Location: North of Watford
Services: Humane elimination of all common Internet pests
Posts: 37,045
|
Re: B&Q Satellite - Ross freesat box and dish
Once again it underlines the usefulness of a sat finder, and the total futility of trying to find satellites by holding a dish in your hand and waving it about ...
Glad it worked out for you and your chum in the end.
|
|
|
09-01-2011, 20:27
|
#296
|
Inactive
Join Date: Jan 2011
Posts: 4
|
Re: B&Q Satellite - Ross freesat box and dish
Update - tried to get a replacement LNB from the store, Management not interested and have referred me to Ross direct to gain a replacement. Email sent to Ross this afternoon and I await a response.
Will keep you posted
Tony
|
|
|
09-01-2011, 20:38
|
#297
|
Trollsplatter
Cable Forum Team
Join Date: Jun 2003
Location: North of Watford
Services: Humane elimination of all common Internet pests
Posts: 37,045
|
Re: B&Q Satellite - Ross freesat box and dish
Tony: The Sale of Goods Act 1979 (as amended) clearly states that the contract of sale is between you and the retailer, not you and the manufacturer. B&Q has acted illegally in refusing to satisfy your complaint that the goods are unfit for purpose.
YOU DO NOT HAVE TO DEAL WITH ROSS ON THIS ISSUE. THE LIABILITY LIES EXCLUSIVELY WITH B&Q.
A call/email to Ross Customer Services might help you resolve any set-up issues if you were finding the instructions difficult to follow, however you already had the thing set up and working properly. If the information you have already posted in this thread is accurate and complete, then you already have all the proof you need that the goods are faulty, and you are entitled to a refund or replacement.
I suggest that you try to find time to go back into the store tomorrow, or any day this week, when the Sunday boys aren't on shift, and try to speak to a senior suprvisor, if not the actual store manager. This is your legal right and you are quite entitled to involve your local council's Trading Standards office if B&Q continues to be difficult.
|
|
|
25-02-2011, 14:13
|
#298
|
Inactive
Join Date: Feb 2011
Posts: 1
|
Re: B&Q Satellite - Ross freesat box and dish
Hi im new on here, I am considering buying this dish from my local b & q in washington, north east england. my main reason for this is for the sport on the foreign channels could anyone please tell me if this is worth it?
Thanks,
James
|
|
|
25-02-2011, 14:15
|
#299
|
Inactive
Join Date: Dec 2007
Posts: 18,398
|
Re: B&Q Satellite - Ross freesat box and dish
Depends if you like sport with non-english commentary (you will find though that a lot of it is encrypted as well)
|
|
|
21-03-2011, 12:21
|
#300
|
Inactive
Join Date: Mar 2011
Posts: 2
|
dave
hi al,l i have the ross hd digital receiver hdr-8130usb when instaled i can only get 48% on pic quality also only bbc london instead of north west can any body help ta
|
|
|
Currently Active Users Viewing This Thread: 2 (0 members and 2 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT +1. The time now is 09:00.
|