Quote:
Originally Posted by heero_yuy
It would make your DS power ideal but I suspect that it wouldn't resolve the issues that you're experiencing. Seeing as you have it, it's worth fitting. If you fit it don't over-tighten the cable fixings.
|
Mmhk,I don't really have any issues other than my DS levels getting higher. Right now some Channels are nearing 9.
Channel Frequency (Hz) Power (dBmV) SNR (dB) Modulation Channel ID
1 298750000 7 38 256 qam 21
2 322750000 7 38 256 qam 24
3 314750000 7.1 38 256 qam 23
4 306750000 7.4 38 256 qam 22
5 290750000 6.5 38 256 qam 20
6 282750000 6.9 38 256 qam 19
7 274750000 7 38 256 qam 18
8 266750000 7.3 38 256 qam 17
9 258750000 7 38 256 qam 16
10 250750000 7.3 38 256 qam 15
11 242750000 7.5 38 256 qam 14
12 234750000 8 38 256 qam 13
13 226750000 8 38 256 qam 12
14 218750000 8.1 38 256 qam 11
15 210750000 8.4 38 256 qam 10
16 202750000 8.5 40 256 qam 9
17 194750000 8.5 38 256 qam 8
18 186750000 8.5 38 256 qam 7
19 178750000 8.8 38 256 qam 6
20 170750000 8.8 38 256 qam 5
21 162750000 8.5 38 256 qam 4
22 154750000 8.5 38 256 qam 3
23 146750000 8.3 38 256 qam 2
24 138750000 8.4 38 256 qam 1
Is it as easy as just taking the Coax cable out of my SH3, putting that in one end of the Attuenator than the Attuenator into my SH3