Re: Areas already upgraded (2012 double speed upgrades)
Just a small question, my Uncle is being sent a Superhub as his modem can't support 20Mb (it's an NTL:home 120 I think). Will this mean he'll get 30Mb once the Superhub is connected, even though the initial upgrade was from 10Mb to 20Mb?
|
Re: Areas already upgraded (2012 double speed upgrades)
nope, although customers "have" to have a shub for 30mbit because they need to be on docsis3 for the speed the shub is backwards compatible with docsis1 and 2 and can be configured for all speeds. When you hook it up and gtet it registered it will downloaded the latest firmware and then the config file for the speed you have been provisioned for (20mbit)
|
Re: Areas already upgraded (2012 double speed upgrades)
Quote:
|
Re: Areas already upgraded (2012 double speed upgrades)
Quote:
|
Re: Areas already upgraded (2012 double speed upgrades)
OK, I've been doubled up to XL60mbps (from XL30), happened yesterday morning I believe from the modem uptime, but I wasn't in for long after work yesterday so didn't spot until now..
Area 24, AL7 (Welwyn Garden City/Panshanger ) Considering we were forecast April-July, I reckon mid-May's not a bad effort. Speedtest.net result below: https://www.cableforum.co.uk/images/...2012/05/24.png Looks like I've lost a little bit of the upstream which always maxed out previously. Startup Procedure Procedure Status Comment Acquire Downstream Channel 267000000 Hz Locked Connectivity State OK Operational Boot State OK Operational Configuration File OK Security Enabled BPI+ Downstream Channels Lock Status Modulation Channel ID Max Raw Bit Rate Frequency Power SNR Docsis/EuroDocsis locked Locked QAM256 66 55616000 Kbits/sec 267000000 Hz -1.8 dBmV 39.9 dB Hybrid Locked QAM256 67 55616000 Kbits/sec 275000000 Hz -2.0 dBmV 40.2 dB Hybrid Locked QAM256 68 55616000 Kbits/sec 283000000 Hz -2.4 dBmV 40.0 dB Hybrid Locked QAM256 69 55616000 Kbits/sec 291000000 Hz -2.7 dBmV 39.8 dB Hybrid Locked QAM256 70 55616000 Kbits/sec 299000000 Hz -1.5 dBmV 40.2 dB Hybrid Locked QAM256 71 55616000 Kbits/sec 307000000 Hz -1.7 dBmV 40.4 dB Hybrid Locked QAM256 72 55616000 Kbits/sec 315000000 Hz -1.8 dBmV 40.0 dB Hybrid Locked QAM256 73 55616000 Kbits/sec 323000000 Hz -1.9 dBmV 39.9 dB Hybrid Upstream Channels Lock Status Modulation Channel ID Max Raw Bit Rate Frequency Power Locked ATDMA 34 20480 Kbits/sec 35800000 Hz 49.8 dBmV Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV Primary Downstream Service Flow Downstream(0) SFID 62612 Max Traffic Rate 66000000 bps Max Traffic Burst 10000 bytes Mix Traffic Rate 0 bps Primary Upstream Service Flow Upstream(0) SFID 62611 Max Traffic Rate 3072000 bps Max Traffic Burst 8160 bytes Mix Traffic Rate 0 bps Max Concatenated Burst 8160 bytes Scheduling Type Best Effort |
Re: Areas already upgraded (2012 double speed upgrades)
Quote:
|
Re: Areas already upgraded (2012 double speed upgrades)
Quote:
Jitter looks pretty awful this morning though - my ping chart looks horrible. Not sure if that's a reflection of work still going on. pingtest.net only scored me at a B with a warning about online gaming not being optimal. Will see what it looks like in a couple of weeks time before worrying about it. |
Re: Areas already upgraded (2012 double speed upgrades)
Quote:
|
Re: Areas already upgraded (2012 double speed upgrades)
Is there any technical or financial reason why they would only go from 4 -> 6 instead of 4 -> 8 downstream channels?
|
Re: Areas already upgraded (2012 double speed upgrades)
8 costs more and is more difficult.
|
Re: Areas already upgraded (2012 double speed upgrades)
Some areas might even get away with less channels so they can save money and time by using less, I think we all know what virgin is like for cutting corners.
Although in saying that some areas seem to be being treated differently my friend on Belf has been upgraded with 5 channels and thats in a student area (literally) while in my area Bele we have 6 channels but no double speed yet. |
Re: Areas already upgraded (2012 double speed upgrades)
Just noticed that our 30Mb has been doubled today (downstream only), and coincidentally the wireless radio in the superhub seems to have broken.
Area is brig17-2-0 on the 30MB package. https://www.cableforum.co.uk/images/...2012/05/16.png Code:
Startup Procedure |
Re: Areas already upgraded (2012 double speed upgrades)
Not sure if posted already but I know my area has been done.
We upgraded to 30Mbit and were told over the phone the area was ready to get the double speed increase straight away so we are went straight from 10Mbit to 60Mbit. https://www.cableforum.co.uk/images/...2012/05/17.png N1 / Islington / London Code:
Connection |
Re: Areas already upgraded (2012 double speed upgrades)
Quote:
|
Re: Areas already upgraded (2012 double speed upgrades)
Hi
Yes i have been doubled up (area 24 AL10 Hatfield) from 10Mbs to 20Mbs. BUT i was getting a solid 9.9 Mbs before, but now i get about 15-16 Mbs. I thought i would get closer to 20 Mbs. They are offering us the super hub for £20 if we have problems. Should i try the super hub? Currently have the blue ntl 250 modem and an Apple Airport Express wireless router. Any advice?? I have heard bad things about the super hub wireless ability. |
All times are GMT +1. The time now is 08:40. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.