Cable Forum - View Single Post

Sephiroth · 22-04-2012, 17:14

Is it all going well?

Strictly speaking your downstream power levels are a bit high. Most usually, these levels work perfectly well but the "fancy" SuperHub needs not to mind being higher than +7 dBmv. The VM Techs won'r raise an eyebrow unless it's over 10.

The one thing I did notice is that your street cabinet amplifier seems to be incorrectly sloped. The higher frequencies should show attenuated power and they don't. It might not matter in your case, but amplifiers should be correctly sloped as a matter of principle.

Your upstream levels are OK.

22-04-2012, 17:14	#4
Sephiroth Sulking in the Corner Join Date: Jul 2009 Location: RG41 Services: 1 Gbps; Hub 4 MM; ASUS RT-AX88U; Ultimate VOLT. BT Infinity2; Devolo 1200AV Posts: 11,955	Re: what are ideal power levels and snr Is it all going well? Strictly speaking your downstream power levels are a bit high. Most usually, these levels work perfectly well but the "fancy" SuperHub needs not to mind being higher than +7 dBmv. The VM Techs won'r raise an eyebrow unless it's over 10. The one thing I did notice is that your street cabinet amplifier seems to be incorrectly sloped. The higher frequencies should show attenuated power and they don't. It might not matter in your case, but amplifiers should be correctly sloped as a matter of principle. Your upstream levels are OK. __________________ *Seph.* My advice is at your risk.