Can't talk to modem
Just had my ten year old NTL modem replaced by a VMDG280, everything works, but it won't respond to 192.168.0.1 Only suggestion I've found so far is to try another browser, but Chrome , Firefox and IE all time out. Anyone have any suggestions?
|
Re: Can't talk to modem
Well the modem control panel address at least on the 256 is http://192.168.100.1 try that
|
Re: Can't talk to modem
Quote:
---------- Post added at 19:25 ---------- Previous post was at 18:40 ---------- A reboot has fixed it, but ominous after only one day |
Re: Can't talk to modem
Please post the Upstream and Downstream stats from your modem just click http://192.168.0.1/ the username is admin and the password is changeme, then click on the small red writing that says advanced settings then look down the left hand side and under Maintenance click on connection and copy and post the details from there.
|
Re: Can't talk to modem
Quote:
|
Re: Can't talk to modem
Quote:
|
Re: Can't talk to modem
Hi Masque, power levels look much the same as with the old modem and SNR is 6dB better so I think all should be well now, But as an engineer myself I always think there is a reason for problems!
Startup Procedure Procedure Status Comment Acquire Downstream Channel 402750000 Hz Locked Connectivity State OK Operational Boot State OK Operational Configuration File OK Security Enabled BPI+ Downstream Channel Lock Status Locked Modulation QAM256 Channel ID 4 Symbol Rate 5360537 Downstream Frequency 402750000 Hz Downstream Power 9.0 dBmV SNR 42.6 dBmV Upstream Channel Lock Status Locked Modulation QAM16 Channel ID 1 Symbol Rate 2560 Ksym/sec Upstream Frequency 25800000 Hz Upstream Power 39.0 dBmV Primary Downstream Service Flow Downstream(0) SFID 11440 Max Traffic Rate 10240000 bps Max Traffic Burst 3044 bytes Mix Traffic Rate 0 bps Primary Upstream Service Flow Upstream(0) SFID 11439 Max Traffic Rate 1072000 bps Max Traffic Burst 8160 bytes Mix Traffic Rate 0 bps Max Concatenated Burst 8160 bytes Scheduling Type Best Effort |
Re: Can't talk to modem
Power 9.0 dBmV isn't good ..
Although if you don't see any issues, not worth worrying about .. |
Re: Can't talk to modem
Quote:
|
Re: Can't talk to modem
Most will work +15 to -15 however its not wise to be at the extremes.
If you dont get issues at 9db (your return power is great) then dont worry. |
All times are GMT +1. The time now is 06:04. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.