60mb upgrade
Yesterday I got upgraded to 60MB internet and the engineer said it would take up to 24hours until I get them speeds. But now it has been 24hours and the best speed I can get from the wireless is 10-12mbps and from the wired connection I can get 30mbps. Is there anything I could check on the superhub it self to make sure its working properly.
https://www.cableforum.co.uk/images/...2012/04/88.png http://www.speedtest.bbmax.co.uk/res...007&v=15535975 |
Re: 60mb upgrade
could you post up your connection stats.
log into your SH. put this into your web browser and hit enter 192.168.100.1 login defaults... username: admin password: changeme click on advanced settings below the 3 box then connection within the left hand column. |
Re: 60mb upgrade
Quote:
I see your upload speed is correct. Try rebooting the modem again, and if your using your own router, remove it and try connecting the superhub straight into the pc to eliminate your router as the problem. For the record Im running my superhub in modem mode with my own buffalo 300Mbps N router. Cheers https://www.cableforum.co.uk/images/...2012/04/87.png |
Re: 60mb upgrade
Startup Procedure
Procedure Status Comment Acquire Downstream Channel 299000000 Hz Locked Connectivity State OK Operational Boot State OK Operational Configuration File OK Security Enabled BPI+ Downstream Channels Lock Status Modulation Channel ID Max Raw Bit Rate Frequency Power SNR Docsis/EuroDocsis locked Locked QAM256 50 55616000 Kbits/sec 299000000 Hz -3.7 dBmV 38.4 dB Hybrid Locked QAM256 51 55616000 Kbits/sec 307000000 Hz -4.1 dBmV 38.3 dB Hybrid Locked QAM256 52 55616000 Kbits/sec 315000000 Hz -4.5 dBmV 38.1 dB Hybrid Locked QAM256 53 55616000 Kbits/sec 323000000 Hz -4.8 dBmV 38.0 dB Hybrid Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV 0.0 dB Unknown Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV 0.0 dB Unknown Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV 0.0 dB Unknown Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV 0.0 dB Unknown Upstream Channels Lock Status Modulation Channel ID Max Raw Bit Rate Frequency Power Locked ATDMA 4 20480 Kbits/sec 45800000 Hz 47.5 dBmV Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV Primary Downstream Service Flow Downstream(0) SFID 25960 Max Traffic Rate 66000000 bps Max Traffic Burst 10000 bytes Mix Traffic Rate 0 bps Primary Upstream Service Flow Upstream(0) SFID 2389 Max Traffic Rate 3072000 bps Max Traffic Burst 8160 bytes Mix Traffic Rate 0 bps Max Concatenated Burst 8160 bytes Scheduling Type Best Effort Current System Time:Fri Apr 13 10:57:24 2012 |
Re: 60mb upgrade
your on 60meg.
when testing max speeds do it via ethernet not wireless. try > www.speedtester.bt.com/ whats the specs of your wired desktop system? and laptop? download inSSIDer onto a wireless capable device/laptop and run the program. itll scan for all reachable networks. note which channel each uses then set your network to use a channel that isnt in use. the channel numbers will range from 1-13. www.metageek.net/products/inssider/ ---- to change wireless channels on the SH... log into your SH. put this into your web browser and hit enter 192.168.100.1 login defaults... username: admin password: changeme click on advanced settings below the 3 box then wireless settings within the left hand column. also test changing mode from 300 to 145. |
Re: 60mb upgrade
Downstream power could be a little better, optimum is above -3 dBmV, but I dought thats causing the low speeds since your well within tolerance.
|
Re: 60mb upgrade
could be.. may be :erm:
|
Re: 60mb upgrade
On my wired computer i get a constant 62mpbs now after changing nothing and I changed upto 300mbps to 145mbps and can get 20mbps on wireless which is still no where near
|
Re: 60mb upgrade
did you change the wireless channel to one that isnt in use? try 13.
whats your laptop specs? |
Re: 60mb upgrade
Im using a wireless usb for my computer. I just changed the channel to 13 and made the speed go down to 14mbps.
Do you mean processor, graphics card etc specs? |
Re: 60mb upgrade
what adapter you got, whats the wireless strength and yes those specs please
|
Re: 60mb upgrade
Windows 7 64bit
Intel Core 2 Quad CPU @2.66GHz 4.00GB RAM Nvidia 250gtx geforce Sitecom wireless networking 54g usb adapter 54g wl-608 Signal strength Excellent |
Re: 60mb upgrade
call VM and ask for the free wireless USB adapter
|
Re: 60mb upgrade
Ok, I have tested all channels and channel 6 seems to be the best for me and I have changed it from 300mpbs to 145mpbs and can now get 25.97mbps so far
|
Re: 60mb upgrade
I have been monitoring the quality of my broadband since this morning and so far it is this.
https://www.cableforum.co.uk/images/...2012/04/86.png I think the big red lines are when I turned my router off to change settings but im not sure. |
Re: 60mb upgrade
the red is inactively pinging the IP.
did you get a USB adapter ordered via VM 150/151 ? |
Re: 60mb upgrade
I am waiting for my parent to finish work as he is the account holder and will aks them about the speed issue and for the usb adapter as two laptops in the house are also getting download speeds of 14-25mbps.
I also tried to connect my old wireless router to the super hub which used to connect to my old modem but that made no difference in speed. ---------- Post added at 17:38 ---------- Previous post was at 16:05 ---------- Phoned virgin and after talking to about 4 people and them trying to charge me £30 for an adapter I got it for free and it should arrive next week. |
Re: 60mb upgrade
Quote:
Cheers Grim |
Re: 60mb upgrade
Quote:
|
Re: 60mb upgrade
I was upgraded from 10mbps to 60mbps about 2 weeks ago and have had no issues at all. I use the superhub in modem only mode hooked up to a d-link DIR655 which I've had for about 4 years and its been as solid as a rock.
On wireless my kids get around 18/22mbps on their laptops (802.11g). The highest wireless I've had on my iMac is 57mbps (802.11n) but l keep that on a wired connection which usually achieves around 62mbps. We also have 2 360's on wired and various other wireless devices. All is good so far. |
Re: 60mb upgrade
Got sent a superhub yesterday to upgrade to 60meg, going to give it a try in router mode, if it fails will probably put my vmng back in, my area only has 4 d/s channels anyway
|
Re: 60mb upgrade
you dont need a superhub, VM arent requiring you to get rid of the VMNG
|
Re: 60mb upgrade
Quote:
Im using the superhub in modem mode with a buffalo airstation N router and can get a solid 62/63mbps Wireless on my laptop. Cheers |
All times are GMT +1. The time now is 07:33. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.