Uddingston upstream 3 channels?
 

Has this been around for a while or is this just new?.. First time i've seen a 32QAM upstream.

Screenshot attached from status page.

Re: Uddingston upstream 3 channels?
 

Am still on 2 am on cpc*-uddi22-2-0-cust*.20-*.cable.virginm.net

Attachment 26240

Re: Uddingston upstream 3 channels?
 

uddi19-2-0 for me

Re: Uddingston upstream 3 channels?
 

Is this for the increase upload speed rollout?

Re: Uddingston upstream 3 channels?
 

No idea im currently on 152/12

Re: Uddingston upstream 3 channels?
 

So are you in the Hamilton area as I was on that UBR about 4 years ago

Re: Uddingston upstream 3 channels?
 

No mate.

Re: Uddingston upstream 3 channels?
 

Let's hope they keep rolling this out, Can you post the Network Log for the modem to see if we can tell when the upgrade happen Ps. remove ip from the log before posting m8 Thank you. :)

Re: Uddingston upstream 3 channels?
 

attached.

Re: Uddingston upstream 3 channels?
 

You are the best thank you for posting the log info. :) It looks like it may have been enabled on the 7th

Re: Uddingston upstream 3 channels?
 

Restarted Hub and all channels are now 64QAM. as apposed to one 32QAM in the previous screen.

---------- Post added at 07:32 ---------- Previous post was at 07:31 ----------

https://www.cableforum.co.uk/images/...2015/07/18.png

Re: Uddingston upstream 3 channels?
 

Interesting you've got 3 upstream channels, but I think the 32QAM was was an irregularity and it should have been 64QAM.

Either way, this is all good stuff as it's a large increase in available bandwidth.

Re: Uddingston upstream 3 channels?
 

Splendid. The upgrades on the upstream side, to go along with the downstream that have been a work in progress for a little while, have begun :)

Re: Uddingston upstream 3 channels?
 

Very interesting. I just had another look at mine to see if I was on 3 upstreams yet and when I looked at my log I noticed a new config had dropped down on Friday. Last week I was on r29 and now it is V2.01.03. Have they released new firmware for the upstream channel bonding or was it capable of doing it already?

Edit: just done a reboot and still on two upstreams, one qam16 and the other qam64. The only difference is that the ranging status on the other two channels is "other".

Re: Uddingston upstream 3 channels?
 

What happened last night? Did something happen on my superhub?

url=http://www.thinkbroadband.com/ping/share/dfb37b821c13ec7f66e367a938739ec3-12-07-2015.html]http://www.thinkbroadband.com/ping/s...12-07-2015.png[/url]