Re: aerial boosters
You connect the aerial into the aerial in socket on the booster and then connect an aerial lead to the output socket and the other end into the TV.
|
Re: aerial boosters
As Ben says the booster isn;t designed to transmit the signal via the mains cabling but instead it boosts the signal over co-axial cable. with or without the booster you still need the co-ax..
|
Re: aerial boosters
so u cant just have one lead goin from the booster to tv
if im readin it rite u need a lead and a indoor aerial ? for it to work |
Re: aerial boosters
Yep, you need an antenna, a bit of coa-ax and a TV to recieve TV channels
If the antenna is weak (indoor or a fringe area) or it's a long co-ax run then the booster you show goes between the coax to the antenna and another piece of coax to the TV and amplifies the signal BUT they can;t perform miracles and boost a really bad signal |
Re: aerial boosters
The aerial amplifier you are looking at does not replace a cable, it boosts the signal in the cable. We have had this discussion with the OP already in another thread.
In short there is not yet a way to wirelessly transmit high quality video to a large screen TV. Ofcom have hinted at licensing this type of product in future, but it is not yet off the drawing board. A direct connection from the TV to aerial is the only option. |
Re: aerial boosters
would have been cheaper and better ( if only 1 tv is need ) a female coax to male ( coax meters needed ) and male coax plug at end to plug in tv/freeview box . u drop some db`s but would be low.
|
Re: aerial boosters
Quote:
Threads merged. |
Re: need help to connect tv to aerial
Is the TV on the outside wall?
|
All times are GMT +1. The time now is 03:06. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.