Re: BELKIN Router/Adapter Problem.....HELP PLEASE!!!!!
 

okay in device manager you go to Universal Serial Bus controllers and check whats the most common name; ie, intel, via, sis, nforce etc etc

Re: BELKIN Router/Adapter Problem.....HELP PLEASE!!!!!
 

its an 802.11g-54 Mbps and on the back its a v4002 uk with a Mac address too.

---------- Post added at 23:55 ---------- Previous post was at 23:54 ----------

there are two listed.

Standard Universal PCI to USB Host Controller
and USB Root Hub

Re: BELKIN Router/Adapter Problem.....HELP PLEASE!!!!!
 

okay, download the following driver
http://www.belkin.com/uk/support/art...0v4drivers.exe

this is a driver only install, so it wont use the belkin utility. you would have to uninstall the present software before installing that.

Re: BELKIN Router/Adapter Problem.....HELP PLEASE!!!!!
 

is it me or is that MAD, its saying its unreachable BUT it receaved all the ping responses back :erm:

im just looking for confirmation that the routers current IP is infact 192.168.2.1

and seeing if you can get some form of pinging at least one way, so confirming there is at least some part of the LAN to and/or from the USB wireless PC working .

as Doc says it looks like a full reinstall is in order, as it appears the USB is connecting to the router so its working to some degree and so im inclined to think its OK on the hardware side.

the fact your on 'Connection 17' means you have been trying a long time to fix this so we will try to guide you.

id be inclined to also remove all the ethernet devices inside device manager and start afresh, as starting from no TCP:ip devices installed means we are clearing the old windows code/apps and re-installing these too, alongside your belkin drivers.

im off as well though right now as i need to get stuff done and cover some other bits etc.

just give Doc that belkin USB version number as its very important to be sure were to go, if thats not given he cant tell if theres a known problem with it.

Re: BELKIN Router/Adapter Problem.....HELP PLEASE!!!!!
 

am off now Andy, so I'll be around tomorrow again :) see if we can sort this problem out for ya.

Re: BELKIN Router/Adapter Problem.....HELP PLEASE!!!!!
 

Thanks Doc, Hope you get this in time b4 u go. Your help is greatly appreciated. C u 2 moz. Will c if popper will chat some more b 4 he goes 2.

Re: BELKIN Router/Adapter Problem.....HELP PLEASE!!!!!
 

there is an option that is possible to do, but not always the best..... remote login :s meaning I take the laptop over if its wired into the router and install the bugger for you....but last ditch resort.

---------- Post added at 00:18 ---------- Previous post was at 00:18 ----------

and not for tonight

Re: BELKIN Router/Adapter Problem.....HELP PLEASE!!!!!
 

I am still here, but only just coz me thinks its time to call it a day 2. Not sure yet what best to do about this goddamn Belkin x!/$*@# but I have just copied the driver install onto a disc, thanx 4 that Doc, and will transfer to the laptop in the morning. Will catch up with you guys then, be around 10 or 11 I reckon.

---------- Post added at 00:38 ---------- Previous post was at 00:30 ----------

popper, u still there

Re: BELKIN Router/Adapter Problem.....HELP PLEASE!!!!!
 

okay so uninstall the current driver that you have on the stick. also can you make double sure that on the USB adapter it is saying v4000uk.

Re: BELKIN Router/Adapter Problem.....HELP PLEASE!!!!!
 

Hi Doc,
I just got to your new message, and thanks 4 that.
I can confirm that the version of the USB stick reads v4002uk
and not v4000uk as in your last msg.
Can you step by step me to uninstall the driver so I don't mess up.
Andy

Re: BELKIN Router/Adapter Problem.....HELP PLEASE!!!!!
 

morning chaps.... ;)

before you install the driver again,unplug the USB,go into the device drivers networking too and remove all ethernet devices.

the best way to do this is to remove all devices including the old hidden ones like this:
we are talking xp sp2 on the lappy right?.

click start,right click 'my computer/manage,

left click 'device manager',

in 'computer management' click view,'show hidden devices'

then you should see all the old network devices ,remove every single one of them and that will get you back to generic.

im assuming theres no built in wired ethernet, and so you can now plug in the USB wireless card, OR reset and let the windows auto-install any removed ethernet if there is infact one inside the lappy.

doing that replaces any old TCP/IP code and apps and reinstalls it, but that only really happens when you remove all the ethernet, even the odd firewire networking devices your machine might have there.

Re: BELKIN Router/Adapter Problem.....HELP PLEASE!!!!!
 

Hi Popper,

I am in Computer Management - Device Manager, I clicked View and selected
Show Hidden Devices, and now I have a list of stuff showing for my lappie.
Now I'm really stuck as to what to select next.

Re: BELKIN Router/Adapter Problem.....HELP PLEASE!!!!!
 

remove EVERYTHING in 'network adaptors'

did you say it has a wired ethernet, i forget?, if so after you have removed it all one at a time without rebooting, then its better to have windows reinstall the wired ethernet first before you re-plug the USB wireless card back in and reinstall that driver too.

Re: BELKIN Router/Adapter Problem.....HELP PLEASE!!!!!
 

In Network Adapters, the first one listed is as follows:
3Com 3C920 Integrated Fast Ethernet Controller (3C905C-TX Compatible)
and under that is:
3Com 3C920 Integrated Fast Ethernet Controller (3C905C-TX Compatible) Packet Scheduler Miniport.

Does that mean it has wired ethernet then?

Re: BELKIN Router/Adapter Problem.....HELP PLEASE!!!!!
 

yep, just reset or use the right click 'scan for hardware changes' BEFORE WE move onto pluging the USB back in.

windows will find all the currently attached devices you have removed from the list and re-install them plus all the TCP:ip networking stuff.

---------- Post added at 12:01 ---------- Previous post was at 12:00 ----------

Doc can use that wired 3Com 3C920 Ethernet if it comes down to wireing up that port to the router, and do the remote install if needs be, but it will work this time, so no need ;)