Cable Forum
Page 2 of 4 1 2 34
Show 100 post(s) from this thread on one page

Cable Forum (https://www.cableforum.uk/board/index.php)
-   Virgin Media Internet Service (https://www.cableforum.uk/board/forumdisplay.php?f=12)
-   -   Superhub : SH3 Question (https://www.cableforum.uk/board/showthread.php?t=33704820)

Paul 30-04-2017 14:45
Re: SH3 Question
 
No one said it doesnt have issues, they said they personally were not experiencing any.

I have an SH3 and dont have any issues that I notice, but then I dont care at all about online gaming.

Ken W 30-04-2017 15:05
Re: SH3 Question
 
Quote:
Originally Posted by Paul M (Post 35896915)
No one said it doesnt have issues, they said they personally were not experiencing any.

I have an SH3 and dont have any issues that I notice, but then I dont care at all about online gaming.

Same here

Gobble 30-04-2017 16:56
Re: SH3 Question
 
I didn't noticed anything until my downstreams changed, then I started getting some odd issues. I first thought it was down to a particular server or peering route... I should be so lucky.

Regardless of what people do or don't notice personally, the fact remains there is an issue with the puma 6 based modems and in recent light, it seems latency is the least of the worries.

Kushan 02-05-2017 10:38
Re: SH3 Question
 
Quote:
Originally Posted by cje85 (Post 35896890)
No one is asking for a SH1 but many are asking for SH2AC and reporting problems with gaming that started the moment they switched to a SH3.
OP has a SH1, the point I'm making is that even with the latency issue, the SH3 is still a better device.

Quote:
Originally Posted by cje85 (Post 35896890)
If the Hub actually doesn't have latency issues which impact performance you have to wonder why there's a firmware update being rolled out in the US which reduces latency (surely no need?), plus legal action against Arris and Netgear for continuing to sell modems powered by the Puma 6.
Nobody's saying it doesn't have an issue, just that its impact is overblown. It doesn't cause lag, or warping or rubber-banding in online games. Some games might be more affected than others, depending on how their netcode works, but having play various twitch shooters I haven't noticed any spikes at all - on a SH3 with 20 Downstream channels.

Hom3r 12-06-2017 19:38
Re: SH3 Question
 
Quick question as I'm tethering to my mobile.

My SH is no more, it has ceased to be, it's an ex-modem.

I have a SH3 winging its way to me, my question is what is it IP, is it 192.168.0.1 like the SH1?

I need to put it in to modem mode as my Asus RT-N66U has static IPs set and my xbox is one of them as it has ports open set to its IP.

is the SH3 easy to put in to modem only mode?

Is there a PDF manual?

Skie 12-06-2017 19:51
Re: SH3 Question
 
  1. 192.168.100.1
  2. Yes. Just need the admin password from the label, click the modem mode menu then choose modem mode and save. It wil reboot and then be ready to do its job.
  3. Probably a manual or a guide on the VM help section, but in modem mode it's not exactly a complicated bit of kit. Menu looks different but its pretty similar to how the other hubs work. No login required to see the modem info, just to see the settings and firmware version.

Hom3r 12-06-2017 19:56
Re: SH3 Question
 
Thanks, just torture waiting

SnoopZ 12-06-2017 20:13
Re: SH3 Question
 
It takes alot longer to connect compared to the SH1,2 so don't worry, also in router mode all the lights apart from the white strip at the bottom will be off, in modem mode i am not sure how it looks.

General Maximus 12-06-2017 23:07
Re: SH3 Question
 
Quote:
Originally Posted by Hom3r (Post 35903094)
I have a SH3 winging its way to me, my question is what is it IP, is it 192.168.0.1 like the SH1?
yup

Quote:
Originally Posted by Skie (Post 35903096)
  1. 192.168.100.1
By default the shub will be in router mode with an ip of 192.168.0.1 and it is only when you put it in modem mode that it switches to 192.168.100.1. Homer will therefore have to access it on 192.168.0.1 to make the change and the only time you will have to go to 100.1 after that is if you want to check the power levels etc via router status.

Kushan 13-06-2017 11:17
Re: SH3 Question
 
Pretty sure 192.168.100.1 always works, regardless of modem/router mode.

General Maximus 13-06-2017 11:36
Re: SH3 Question
 
It didnt on my shub 2. I had only used linksys routers for 14 years or so before i got my shub2 and i was scratching my head when i went to 192.168.100.1 and it said page not found. Having read many many posts about shub1 i remembered in router mode it is 0.1 0.1 stopped working once i switched to modem mode and .100.1 responded.

Paul 13-06-2017 14:08
Re: SH3 Question
 
Quote:
Originally Posted by Kushan (Post 35903164)
Pretty sure 192.168.100.1 always works, regardless of modem/router mode.
I does on my SH3, thats the address I used initially, before I switched it to modem mode (and once since, when I temp switched back for some testing).

Broken Hope 14-06-2017 21:05
Re: SH3 Question
 
Quote:
Originally Posted by SnoopZ (Post 35903099)
It takes alot longer to connect compared to the SH1,2 so don't worry, also in router mode all the lights apart from the white strip at the bottom will be off, in modem mode i am not sure how it looks.
In modem mode the white strip is magenta.

SnoopZ 14-06-2017 21:10
Re: SH3 Question
 
Quote:
Originally Posted by Broken Hope (Post 35903397)
In modem mode the white strip is magenta.
Yes i had a feeling it was different but i have no need for modem mode as the Hub3 is sufficient. :)

Kushan 15-06-2017 13:56
Re: SH3 Question
 
Quote:
Originally Posted by General Maximus (Post 35903168)
It didnt on my shub 2. I had only used linksys routers for 14 years or so before i got my shub2 and i was scratching my head when i went to 192.168.100.1 and it said page not found. Having read many many posts about shub1 i remembered in router mode it is 0.1 0.1 stopped working once i switched to modem mode and .100.1 responded.
Very peculiar, I am sure it worked on my old SH2 but I switched that to modem mode pretty quickly and never went back.


All times are GMT +1. The time now is 14:13.
Page 2 of 4 1 2 34
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.