View Full Version : 30M High Downstream Power Levels
Hornet600
06-02-2012, 13:20
Hi i have the above, an engineer is booked for tomorrow, i have read that the engineer can fit an attenuator, anybody know where this is fitted :confused:
Thanks
Between the cable and the modem/superhub.
craigj2k12
07-02-2012, 00:15
like this....
https://www.cableforum.co.uk/images/local/2012/02/43.jpg
Hornet600
07-02-2012, 09:22
Thanks for your reply's, and for the photo craigj2k12.
Hornet600
07-02-2012, 14:40
Update. The engineer lowered the power settings from the tap, so no attenuator sicking out of the SH :)
craigj2k12
07-02-2012, 15:05
can you post an update of the stats to get the a-okay
Hornet600
07-02-2012, 15:19
can you post an update of the stats to get the a-okay
Here you go :)
Downstream Channels
Lock Status Modulation Channel ID Max Raw Bit Rate Frequency Power SNR Docsis/EuroDocsis locked
Locked QAM256 198 55616000 Kbits/sec 299000000 Hz 0.9 dBmV 37.8 dB Hybrid
Locked QAM256 197 55616000 Kbits/sec 291000000 Hz 1.0 dBmV 38.6 dB Hybrid
Locked QAM256 199 55616000 Kbits/sec 307000000 Hz 0.8 dBmV 37.8 dB Hybrid
Locked QAM256 200 55616000 Kbits/sec 315000000 Hz 0.4 dBmV 37.1 dB Hybrid
Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV 0.0 dB Unknown
Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV 0.0 dB Unknown
Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV 0.0 dB Unknown
Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV 0.0 dB Unknown
Upstream Channels
Lock Status Modulation Channel ID Max Raw Bit Rate Frequency Power
Locked ATDMA 1 20480 Kbits/sec 35800000 Hz 43.5 dBmV
Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV
Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV
Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV
qasdfdsaq
07-02-2012, 15:27
An engineer doing a job properly. Rare to hear these days.
craigj2k12
08-02-2012, 02:53
An engineer doing a job properly. Rare to hear these days.
I cant believe you would mention that when many call centre staff are being made redundant
Disclaimer
The above joke is intended as a joke, referring to another thread in which I was accused of making fun out of the redundancies.
See, jokes aren't as funny when you have to write a disclaimer and an explanation, but with some cretins out and about on the internet, sometimes you have no choice
qasdfdsaq
08-02-2012, 08:59
Engineers aren't call centre staff.
Though my opinion on VM call centre staff are another matter entirely.
I personally don't give a damn what cretins on the internet think.
vBulletin® v3.8.11, Copyright ©2000-2024, vBulletin Solutions Inc.