SuperHub

[crazyronnie]

I just got the superhub to replace my long standing VMNG300. I've set the superhub to modem only mode. But i cant seem to be able to find where the currant downstream and upstream power levels are. Can someone point me in the right direction?

---------- Post added at 10:58 ---------- Previous post was at 10:54 ----------

i found it. Sorry for wasting a thread.

[Kymmy]

For reference it's the same as most vm modems at http://192.168.100.1

[crazyronnie]

I've noticed that the power adaptor for the SuperHub is making a high pitch buzzing sound its pretty loud and very annoying especially as the hub is in my bed room. Is this normal for a SuperHub adaptor?

[hjf288]

Yup

[crazyronnie]

ah ok. VM are sending out a new hub with power adaptor. I guess i'll have the same issue with the new one as well.

---------- Post added at 15:59 ---------- Previous post was at 15:13 ----------

Will the power adaptor for the VMNG300 work with the SuperHub

[BenMcr]

Will the power adaptor for the VMNG300 work with the SuperHubNo, you need use the one that comes with the SuperHub

[gotcabled]

the power adaptor should be silent

[crazyronnie]

BenMcr is the SuperHub power adaptor supposed to make a high pitch buzzing sound or have i just got a faulty one?

[BenMcr]

I've not heard mine do so but then it is buried behind stuff in my lounge (adapter that is, not SuperHub)

[crazyronnie]

VM are sending me a new hub and power adaptor. Hopefully the power adaptor is silent

[hjf288]

the power adaptor should be silent

All 3 of mine make noises?

[crazyronnie]

BTW SuperHub in modem modem is just as good as my old VMNG300.

[thenry]

had my whining PSU replaced with a whole new unit.. it does the same thing although it is a little quieter

[crazyronnie]

http://www.thinkbroadband.com/ping/share-thumb/7612be9880ce1a1afee7d2b7e2c1af89-27-01-2012.png

I replaced the VMNG300 with the SuperHub after 10.

[qasdfdsaq]

So by just as good you mean three times worse?

[crazyronnie]

yeah i take what i said earlier back.

[crazyronnie]

Download Failed (1)

I never use to get anything like this before the SuperHub.

SuperHub issue or coincidence?

[General Maximus]

lol, i wanted to correct him on that but you have done it for me :rofl:

[crazyronnie]

The superhub isnt working out for me. Im gonna ring VM tomorrow and hopefully get my VMNG300 activated

[crazyronnie]

https://www.cableforum.co.uk/images/local/2012/06/92.png



Connection

Startup Procedure
Procedure Status Comment
Acquire Downstream Channel 298750000 Hz Locked
Connectivity State OK Operational
Boot State OK Operational
Configuration File OK
Security Enabled BPI+
Downstream Channels
Lock Status Modulation Channel ID Max Raw Bit Rate Frequency Power SNR Docsis/EuroDocsis locked
Locked QAM256 98 55616000 Kbits/sec 298750000 Hz 3.4 dBmV 43.9 dB Hybrid
Locked QAM256 97 55616000 Kbits/sec 290750000 Hz 3.9 dBmV 43.6 dB Hybrid
Locked QAM256 101 55616000 Kbits/sec 306750000 Hz 3.1 dBmV 43.0 dB Hybrid
Locked QAM256 102 55616000 Kbits/sec 314750000 Hz 3.0 dBmV 43.4 dB Hybrid
Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV 0.0 dB Unknown
Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV 0.0 dB Unknown
Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV 0.0 dB Unknown
Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV 0.0 dB Unknown
Upstream Channels
Lock Status Modulation Channel ID Max Raw Bit Rate Frequency Power
Locked ATDMA 2 20480 Kbits/sec 35800000 Hz 48.0 dBmV
Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV
Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV
Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV
Primary Downstream Service Flow
Downstream(0)
SFID 730
Max Traffic Rate 53000000 bps
Max Traffic Burst 3044 bytes
Mix Traffic Rate 0 bps
Primary Upstream Service Flow
Upstream(0)
SFID 729
Max Traffic Rate 5140000 bps
Max Traffic Burst 8160 bytes
Mix Traffic Rate 0 bps
Max Concatenated Burst 8160 bytes
Scheduling Type Best Effort
Current System Time:Sun Jan 29 14:17:03 2012