100meg disaster SNR and Power Level????

[imaxtec]

Hi mates,

i am on 100meg but only getting 20meg download advice please
Kind Regards,
sen:confused:

Connection

Startup Procedure
Procedure Status Comment
Acquire Downstream Channel 435000000 Hz Locked
Connectivity State OK Operational
Boot State OK Operational
Configuration File OK
Security Enabled BPI+
Downstream Channels
Lock Status Modulation Channel ID Max Raw Bit Rate Frequency Power SNR Docsis/EuroDocsis locked
Locked QAM64 236 41712000 Kbits/sec 435000000 Hz -4.8 dBmV 39.7 dB Hybrid
Locked QAM64 237 41712000 Kbits/sec 443000000 Hz -5.0 dBmV 39.5 dB Hybrid
Locked QAM64 238 41712000 Kbits/sec 451000000 Hz -5.5 dBmV 39.2 dB Hybrid
Locked QAM64 239 41712000 Kbits/sec 459000000 Hz -6.6 dBmV 37.9 dB Hybrid
Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV 0.0 dB Unknown
Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV 0.0 dB Unknown
Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV 0.0 dB Unknown
Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV 0.0 dB Unknown
Upstream Channels
Lock Status Modulation Channel ID Max Raw Bit Rate Frequency Power
Locked ATDMA 2 20480 Kbits/sec 35800000 Hz 44.5 dBmV
Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV
Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV
Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV
Primary Downstream Service Flow
Downstream(0)
SFID 4264
Max Traffic Rate 110000000 bps
Max Traffic Burst 10000 bytes
Mix Traffic Rate 0 bps
Primary Upstream Service Flow
Upstream(0)
SFID 4263
Max Traffic Rate 10250000 bps
Max Traffic Burst 16320 bytes
Mix Traffic Rate 0 bps
Max Concatenated Burst 16320 bytes
Scheduling Type Best Effort
Current System Time:Wed Jan 25 19:14:00 2012

[sollp]

Hi mates,

i am on 100meg but only getting 20meg download advice please
Kind Regards,
sen:confused:

Connection

Startup Procedure
Procedure Status Comment
Acquire Downstream Channel 435000000 Hz Locked
Connectivity State OK Operational
Boot State OK Operational
Configuration File OK
Security Enabled BPI+
Downstream Channels
Lock Status Modulation Channel ID Max Raw Bit Rate Frequency Power SNR Docsis/EuroDocsis locked
Locked QAM64 236 41712000 Kbits/sec 435000000 Hz -4.8 dBmV 39.7 dB Hybrid
Locked QAM64 237 41712000 Kbits/sec 443000000 Hz -5.0 dBmV 39.5 dB Hybrid
Locked QAM64 238 41712000 Kbits/sec 451000000 Hz -5.5 dBmV 39.2 dB Hybrid
Locked QAM64 239 41712000 Kbits/sec 459000000 Hz -6.6 dBmV 37.9 dB Hybrid
Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV 0.0 dB Unknown
Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV 0.0 dB Unknown
Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV 0.0 dB Unknown
Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV 0.0 dB Unknown
Upstream Channels
Lock Status Modulation Channel ID Max Raw Bit Rate Frequency Power
Locked ATDMA 2 20480 Kbits/sec 35800000 Hz 44.5 dBmV
Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV
Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV
Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV
Primary Downstream Service Flow
Downstream(0)
SFID 4264
Max Traffic Rate 110000000 bps
Max Traffic Burst 10000 bytes
Mix Traffic Rate 0 bps
Primary Upstream Service Flow
Upstream(0)
SFID 4263
Max Traffic Rate 10250000 bps
Max Traffic Burst 16320 bytes
Mix Traffic Rate 0 bps
Max Concatenated Burst 16320 bytes
Scheduling Type Best Effort
Current System Time:Wed Jan 25 19:14:00 2012

The downstream levels could be slightly better, they are -5dB ideal 0dB, but nothing to worry about, SNR good. Upsteam transmit good at 44dB

[7031]

By any chance are you using wireless? Wireless G is only capable of around 20Mbps, so that would explain it.

Try testing using wired. If you want better wireless speeds, try using a wireless N card.

[craigj2k12]

still on QAM64, less bandwidth available on the network and probably causing high downstream utilisation

[borrissey]

how do you check your pwer levels please?

[thenry]

how do you check your pwer levels please?

put this IP into your web browsers address bar and press enter...

192.168.100.1
login - defaults (username: admin - password: changeme
below the 3 red boxes click on advanced settings
to your left look for connection and click on it..
printscreen/upload or copy and paste

[borrissey]

put this into your web browsers address bar...

192.168.100.1 > enter
login - defaults (username: admin - password: changeme
below the 3 red boxes click on advanced settings
to your left look for connection and click on it..
printscreen/upload or copy and paste

Hi found it now thanks I've posted my levels in another thread on here can you check them for me please?

Cheers.

http://www.cableforum.co.uk/board/12/33684983-getting-disconnects-very-annoying.html

[Chrysalis]

lazy rollout in your area, just flicking the config upgrade switch without adequate infrastructure in place.

Try and get tech support to realise QAM64 downstreams are wrong.

[jb66]

lazy rollout in your area, just flicking the config upgrade switch without adequate infrastructure in place.

Try and get tech support to realise QAM64 downstreams are wrong.

Lol, try