PDA

View Full Version : 100M Any problems in Lincoln


GazCBG
08-01-2012, 10:52
I am getting around 25 to 30Mbps instead of the 100Mbps.
Anyone having problem in the lincoln area.

Upload is fine.
Have rebooted the Superhub
Power levels look fine.

Downstream Channels
Lock Status Modulation Channel ID Max Raw Bit Rate Frequency Power SNR Docsis/EuroDocsis locked
Locked QAM256 53 55616000 Kbits/sec 299000000 Hz 1.5 dBmV 41.8 dB Hybrid
Locked QAM256 52 55616000 Kbits/sec 291000000 Hz 2.0 dBmV 42.1 dB Hybrid
Locked QAM256 54 55616000 Kbits/sec 307000000 Hz 0.8 dBmV 41.1 dB Hybrid
Locked QAM256 55 55616000 Kbits/sec 315000000 Hz 0.2 dBmV 40.8 dB Hybrid

General Maximus
08-01-2012, 22:03
something is up. My connection has been sluggish this evening but i didnt think anything of it until i saw your post. I have just done a couple of speed tests on different servers and am not getting anything more then 50/7. Power levels and everything are good, the only thing which stands out is that I am getting a lot of correctable and uncorrectable codewords.

GazCBG
09-01-2012, 09:51
I have just drop down to the 50Mb package.
This morning I was getitng about 70Mb on 100Mb.

I don't think the Superhub has correctable and uncorrectable codewords, so can't check them.