PDA

View Full Version : 30M These power levels ok ?

Efour
11-10-2011, 17:02
My areas finally been finished after some capacity upgrade work. Ive left it a week as they might have been finish off a few things. It went down on Sunday for about 20 mins and the power levels had changed a couple of notches.

These ok or is it worth calling out the tech to tweak them?
Also i find it odd that its connecting to 26,29,30,31 - why the strange 2 number gap ?


Lock Status Modulation Channel ID Max Raw Bit Rate Frequency Power SNR Docsis/EuroDocsis locked
Locked QAM256 31 55616000 Kbits/sec 322750000 Hz 4.1 dBmV 43.2 dB Hybrid
Locked QAM256 26 55616000 Kbits/sec 298750000 Hz 3.6 dBmV 42.8 dB Hybrid
Locked QAM256 29 55616000 Kbits/sec 306750000 Hz 4.3 dBmV 43.4 dB Hybrid
Locked QAM256 30 55616000 Kbits/sec 314750000 Hz 4.4 dBmV 43.2 dB Hybrid
Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV 0.0 dB Unknown
Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV 0.0 dB Unknown
Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV 0.0 dB Unknown
Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV 0.0 dB Unknown
Upstream Channels
Lock Status Modulation Channel ID Max Raw Bit Rate Frequency Power
Locked ATDMA 5 20480 Kbits/sec 35800000 Hz 50.5 dBmV
Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV
Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV
Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV
arcimedes
11-10-2011, 17:12
They seem OK to me. Are you getting any problems? If not dont worry.

I have a slight oddity at the moment. Have never seen this before.

Locked QAM64 66 41712000 Kbits/sec 442250000 Hz 5.0 dBmV 31.3 dB Hybrid
Locked QAM64 65 41712000 Kbits/sec 434250000 Hz 4.4 dBmV 31.4 dB Hybrid
Locked Unknown 67 0 Kbits/sec 450250000 Hz 4.7 dBmV 16.5 dB Hybrid
Locked QAM64 68 41712000 Kbits/sec 458250000 Hz 4.5 dBmV 30.9 dB Hybrid

The speedtest is still perfect though at 30Mbit.
Sephiroth
11-10-2011, 19:45
@arcimedes

As you've noticed, DS3 is unstable with an untenable SNR. Others might agree if it's working OK don't worry, but it isn't working OK and there shouldn't be so much DS noise that the channel doesn't function properly. It will give you gyp.
arcimedes
11-10-2011, 21:51
@arcimedes

As you've noticed, DS3 is unstable with an untenable SNR. Others might agree if it's working OK don't worry, but it isn't working OK and there shouldn't be so much DS noise that the channel doesn't function properly. It will give you gyp.

Thanks for the comments I have posted the data on the VM forum. I dont want to re-boot the shub in case it doesnt come up;)

We'll see what comments there are.