PDA

View Full Version : 192.168.0.1

weemac
01-03-2011, 22:20
Everything seems to be fine with my network except this is what I get when I try to access the Super hub

Sorry should have been 192.168.0.1
General Maximus
01-03-2011, 23:12
have you tried 192.168.1.1?
vanman
01-03-2011, 23:18
try this
http://192.168.0.1/valogin.asp
Peter_
02-03-2011, 06:14
click http://192.168.0.1/ the username is admin and the password is change me
craigj2k12
02-03-2011, 10:16
try rebooting it, seems its not just me having this problem, sometimes it needs a reset, the little button on the back, you have to put a paper clip into.
zekeisaszekedoes
02-03-2011, 12:26
Without plugging mine back in because I hate it, I seem to recall that the Super Hub can be reached by two addresses: router (192.168.0.1) and modem (192.168.100.1).

Bear in mind the web GUI on the Super Hub has an irritating tendency to fail which ever one you use, though.
Mick Fisher
02-03-2011, 12:37
Everything seems to be fine with my network except this is what I get when I try to access the Super hub

Sorry should have been 192.168.0.1
Are you connecting via a proxy?
craigj2k12
02-03-2011, 12:49
192.168.0.1 and 192.168.100.1 both work for me

they both access the same thing (superhub GUI)
weemac
02-03-2011, 17:49
Thanks for the suggestions but no luck so far, I'm going to reboot and see what happens

---------- Post added at 17:49 ---------- Previous post was at 17:34 ----------

That did the trick, after the reboot I could access the hub, I'll keep my eye on this though, seems a bit strange.

Cheers
qasdfdsaq
02-03-2011, 17:54
It's happened to a few other people too
m74uk
06-03-2011, 10:49
Yeah, happens to me quite a bit. Everything else does seem fine.
The only way I can get round it is to restart the modem.
PhlangePhace
06-03-2011, 11:03
I've just logged in having just come against this problem.

Have internet fine and my network is functioning fine but unable to connect to either my superhub at 192.168.0.1 nor my other router (configured as a wireless access point) at 192.168.11.100

Don't fancy a reset as an Engineer who visited yesterday (installing TiVo) informed me that my local UBR blade is 'broke' and is scheduled to be replaced next weekend (so potentially may not be able to re-establish a connection if any equipment powered down)