View Full Version : Cable Box Remote Code
Red Wine Rob
25-10-2010, 21:28
Hi we have a samsung digital Virgin cable box SMT-2110C and need to use a large button control for my partially sighted Mum but can not find the code and none of the codes that came with the Remote, seem to work. Anyone out there able to help?? There was an earlier post (2008) about this where they said to try the Pace Codes, which apparently worked, however they did not state the Code.
Any help will be much appreciated.
RWR
spiderplant
25-10-2010, 21:37
What make/model remote is it?
ps. Welcome to the forum!
Red Wine Rob
25-10-2010, 22:35
Hi and thanks for the welcome,
The Remote is a 6 in one Jumbo Universal which, as far as I can tell, is manufactured by Maplin Electronics (stated on rear of Manual). We left the packaging at my Mums.
Thanks Spiderplant,
RWR
spiderplant
26-10-2010, 21:01
I suggest you try these:
154, 155, 186, 014, 034, 006, 036, 037, 038, 075, 136,147
Failing that, try this:
Make sure the Samsung box is turned on
(1) Press & release the CABLE button
(2) Press & hold the "CODE SEARCH" button until the LED stays on.
(3) Point the remote at the Samsung box. Press and release the POWER button.
(4)The LED will flash as the remote is searching for the code.
(5) As soon as the Samsung box turns off press and release the "ENTER" button.
The remote should NOW be programed
Red Wine Rob
26-10-2010, 21:11
Thanks Spiderplant,
Will try all your suggestions when next at my Mums (prob tomorrow) and will let you know how we go.
Thanks again,
RWR
Red Wine Rob
07-11-2010, 12:59
Hey there Spiderplant,
Any further suggestions? Tried all the codes etc. three digits did not work so tried with a Zero on the front, still none worked or the procedure you suggested.
Any replies welcome.
Thanks RWR
joglynne
07-11-2010, 15:38
Hi RWR, I have just found these instructions for the Jumbo Universal which differ just slightly from Spiders suggestions so may be worth giving a try.
http://www.ehow.co.uk/way_5798581_instructions-jumbo-universal-remote.html
Red Wine Rob
08-11-2010, 22:19
Cheers joglynne,
Have just found out it is a Nikkai Large Button Universal Remote Control, not the Jumbo one. Any further info on code gratefully received anyone?
Cheers RWR
spiderplant
08-11-2010, 22:37
Is this it? http://www.maplin.co.uk/Media/PDFs/A11GT%20Manual.pdf
None of the manufacturer codes look very promising, so try the PowerScan.
vBulletin® v3.8.11, Copyright ©2000-2024, vBulletin Solutions Inc.