PDA

View Full Version : Virgin Modem Login

Zee
04-03-2010, 17:42
How do i log-in to the modem? so i can check what speed i am on, because i think they have downgraded my account to 10Mb it seems.
moaningmags
04-03-2010, 17:49
http://192.168.100.1 username/password if required is root/root
Zee
04-03-2010, 17:51
http://192.168.100.1 username/password if required is root/root

Thanks, but it isn't working :confused:
Peter_
04-03-2010, 18:02
If it is a new Cisco Scientific Atlanta Webstar EPC2100 then try this below.

http://192.168.100.1/_aslvl.asp

Change access level to 2
Password: W2402

You should get a message saying login successful. You should then be able to access those screens for a couple of minutes before they lock again.
Zee
04-03-2010, 18:09
If it is a new Cisco Scientific Atlanta Webstar EPC2100 then try this below.

http://192.168.100.1/_aslvl.asp

Change access level to 2
Password: W2402

You should get a message saying login successful. You should then be able to access those screens for a couple of minutes before they lock again.

That isn't working either. My modem is the blue ntl branded one. i think its ambit 250 or something like that
Peter_
04-03-2010, 18:15
That isn't working either. My modem is the blue ntl branded one. i think its ambit 250 or something like that
If you are behind a router then you will need to connect direct and reboot the modem and then use Mags advice above.
Zee
04-03-2010, 18:16
If you are behind a router then you will need to connect direct and reboot the modem and then use Mags advice above.

yes im behind a router, i'll try it. thanks.
Graham M
04-03-2010, 18:35
If you are behind a router then you will need to connect direct and reboot the modem and then use Mags advice above.
Works for me without connecting direct? :confused:
Peter_
04-03-2010, 21:20
Works for me without connecting direct? :confused:
Oddly it does not for everyone and we then have to ask them to connect direct to the modem.
AbyssUnderground
04-03-2010, 22:55
Normally only doesn't work when using a proxy or the router is on the same LAN IP as the modem (rare). Still the easiest workaround is to connect direct to the modem as stated :)
Rik
04-03-2010, 22:59
It may be a problem with your Flux Capacitor
Peter_
05-03-2010, 08:01
Normally only doesn't work when using a proxy or the router is on the same LAN IP as the modem (rare). Still the easiest workaround is to connect direct to the modem as stated :)
If it is a 3rd party router and we cannot get them to access the configs then we always ask for a direct connection as we do not know how they may have set up their router.
Kymmy
05-03-2010, 10:41
That isn't working either. My modem is the blue ntl branded one. i think its ambit 250 or something like that

Do you get to any screen or a page not found error (i.e.. does it ask for your username/password?)
Zee
06-03-2010, 12:04
Normally only doesn't work when using a proxy or the router is on the same LAN IP as the modem (rare). Still the easiest workaround is to connect direct to the modem as stated :)

Thanks! It was because i was using one of Virgin Media's proxys which i forgot i was using. i've disabled it now and im able to access that page fine now. thank you :tu:

Thanks for the help everyone else.