Modem Signal Levels..Are They Ok?

[-Xt)2eM3-]

Hi guys. Hope I'm posting in the correct area.. Can anyone check to see if my signals ok? Thanks



WebSTAR EPC2100R2
Hardware Version
2.1
Software Version
v2.0.2r1256-070601
Receive Power Level
0.5 dBmV
Transmit Power Level
48.0 dBmV
Cable Modem Status
Operational



Downstream Channel
The data shown in the table below provides information about the signal coming from the network to your cable modem.

Downstream Status
Operational

Channel ID
6

Downstream Frequency
331000000 Hz

Modulation
256QAM

Bit Rate
10240000 bits/sec

Power Level
0.6 dBmV

Signal to Noise Ratio
38.6 dB

Upstream Channel
The data shown in the table below provides information about the signal being transmitted to the network from your cable modem.

Upstream Status
Operational

Channel ID
2

Upstream Frequency
29200000 Hz

Modulation
16QAM

Symbol Rate
512000 bits/sec

Power Level
48.0 dBmV

[Ignitionnet]

You said elsewhere the speeds were constant and the pings low so I don't think any comment really needs to be made. If the signals weren't fine the speeds wouldn't be constant and/or the pings low.

[-Xt)2eM3-]

Hi. Yes I did say that. Just wanted to check if everything was as it should be and I was receiving the best service I possibly could :D

[Rik]

Take no notice of signal levels unless you have a problem.

Mine are high, and when the engineers installed my 50Mb line, they ummed and ahhed about them, asked me if i ever had any problems, I told them no and always got full speed, they didnt seem too concerned :)

[Sephiroth]

Agreed with Rik and BBings. It's always best if someone posting their levels tells their experience story rather than fishing for an opinion.

Mind you, if something stands out as anomalous, a bit of speculation from our side becomes a potentially interesting chase to see if that speculation was correct.

[Peter_]

You are on a 10Mb connection and are a EX-Telewest customer with almost perfect power levels so if the is an issue you should contact Tech Support.

[-Xt)2eM3-]

You are on a 10Mb connection and are a EX-Telewest customer with almost perfect power levels so if the is an issue you should contact Tech Support.

*rings customer service*


I hope I get reimbursed for my poor service LOL... :dunce: