Power Level low? on DS1

[morley04]

Hello DS-1 Is that too low as it was around 6 yesterday


Frequency 299000000 307000000 315000000 323000000
Lock Status
(QAM Lock/FEC Sync/MPEG Lock) Y/Y/Y Y/Y/Y Y/Y/Y Y/Y/Y
Channel Id 69 70 71 72
Modulation 256QAM 256QAM 256QAM 256QAM
Symbol Rate
(Msym/sec) 6.952 6.952 6.952 6.952
Interleave Depth I=12
J=17 I=12
J=17 I=12
J=17 I=12
J=17
Power Level
(dBmV) 2.86 6.38 6.72 6.96
RxMER
(dB) 37.36 38.61 39.40 39.85
Correctable
Codewords 0 0 0 0
Uncorrectable
Codewords 943 972 276 887

[III]

QAM256 are: -3 to +7 dBmV so your ok :)

[morley04]

Thank youu just had to make sure since it has dropped a bit lol

---------- Post added at 19:46 ---------- Previous post was at 18:18 ----------

Ever since it has dropped my connection on xboxlive sucks i cannot host a game without everyone on redbar grrr

---------- Post added at 20:48 ---------- Previous post was at 19:46 ----------

Ever since it has dropped my connection on xboxlive sucks i cannot host a game without everyone on redbar grrr websites take years to load and speedtest only showing 35mb instead of the usual 49

[Sephiroth]

The upload portion of your game hosting runs at 1.5Mbps max.

As for download speeds of 35Mbps at peak time, that's very good.

[Ignitionnet]

That's a heck of a swing nearly 4dB between two downstreams. Wonder if your modem is a bit dicey...

[morley04]

Any suggestions then guys? as it takes for ever to load a webpage and 4dbd o i need a tech to sort out my ds-1 level?

[spiderplant]

That tuner isn't the cause of your problems. Although it's strange to see such a difference, it is still in spec, and the error rate on all tuners is low.

Besides, loading webpages needs very little bandwidth. Is it all webpages or just certain ones?

[Peter_]

It is possible that the modem is faulty due to the difference in power levels and for speed you may be best posting on the Newsgroups as they will be read by 2nd line agents.

Tech Support via Newsgroups.

virginmedia.support.broadband.cable is the one that you want to use and here is the set up link http://www.virginmedia.com/customers/newsgroups/setting-up-outlook-express-exntl.php