New Install - Is this ok/normal?

[SP33DFR3@K]

Hi we had a new install for 10mb done last friday 20th november, i have not cleared the log at all yet, does all of this look okay to you lot ??

Many Thanks;)

Cable Modem Downstream
Downstream Lock : Locked
Downstream Channel Id : 3
Downstream Frequency : 331000000 Hz
Downstream Modulation : QAM64
Downstream Symbol Rate : 5056.941 Ksym/sec
Downstream Interleave Depth : taps32Increment4
Downstream Receive Power Level : 5.6 dBmV
Downstream SNR : 32.7 dB

Cable Modem Upstream
Upstream Lock : Locked
Upstream Channel ID : 2
Upstream Frequency : 37500000 Hz
Upstream Modulation : QPSK
Upstream Symbol Rate : 2560 Ksym/sec
Upstream transmit Power Level : 39.0 dBmV
Upstream Mini-Slot Size : 2

Tue Nov 24 01:42:31 2009 Tue Nov 24 01:42:31 2009 Warning (5) DHCP RENEW WARNING - Field invalid in response
Mon Nov 23 06:01:20 2009 Mon Nov 23 06:01:20 2009 Critical (3) Started Unicast Maintenance Ranging - No Response received - ...
Fri Nov 20 13:48:53 2009 Fri Nov 20 13:48:53 2009 Information (7) The s/w filename specified in the config file is the same as ...
Fri Nov 20 13:48:53 2009 Fri Nov 20 13:48:53 2009 Information (7) A software upgrade filename was specified in the config file.
Fri Nov 20 13:48:53 2009 Fri Nov 20 13:48:53 2009 Information (7) Authorized
Fri Nov 20 13:48:53 2009 Fri Nov 20 13:48:53 2009 Information (7) Registration complete!
Fri Nov 20 13:48:53 2009 Fri Nov 20 13:48:53 2009 Information (7) We registered with a DOCSIS 1.0 config file!
Fri Nov 20 13:48:53 2009 Fri Nov 20 13:48:53 2009 Information (7) Received a REG-RSP message from the CMTS...
Fri Nov 20 13:48:53 2009 Fri Nov 20 13:48:53 2009 Information (7) Sending a REG-REQ to the CMTS...
Fri Nov 20 13:48:53 2009 Fri Nov 20 13:48:53 2009 Information (7) CableModem SNMP configure complete
Fri Nov 20 13:48:53 2009 Fri Nov 20 13:48:53 2009 Information (7) IP init completed ok
Fri Nov 20 13:48:53 2009 Fri Nov 20 13:48:53 2009 Information (7) CableModem TFTP init ok
Fri Nov 20 13:48:53 2009 Fri Nov 20 13:48:53 2009 Information (7) CableModem DHCP client init ok
Fri Nov 20 13:48:53 2009 Fri Nov 20 13:48:53 2009 Critical (3) DHCP WARNING - Non-critical field invalid in response.
Time Not Established Time Not Established Information (7) MAP w/initial maintenance region received
Time Not Established Time Not Established Information (7) Downstream sync ok
Time Not Established Time Not Established Information (7) MAP w/initial maintenance region received
Time Not Established Time Not Established Information (7) Beginning initial ranging...
Time Not Established Time Not Established Information (7) downstream time sync acquired...
Time Not Established Time Not Established Information (7) Downstream sync ok
Time Not Established Time Not Established Information (7) starting ds time sync acquisition...
Time Not Established Time Not Established Information (7) Locked on the downstream. Waiting for UCDs...
Time Not Established Time Not Established Information (7) Downstream lock ok
Time Not Established Time Not Established Information (7) Sync Start
Fri Nov 20 13:46:48 2009 Fri Nov 20 13:46:48 2009 Critical (3) DHCP WARNING - Non-critical field invalid in response.
Time Not Established Time Not Established Critical (3) Received Response to Broadcast Maintenance Request, But no Un...
Time Not Established Time Not Established Critical (3) Started Unicast Maintenance Ranging - No Response received - ...
Time Not Established Time Not Established Critical (3) No Ranging Response received - T3 time-out
Time Not Established Time Not Established Critical (3) No Ranging Response received - T3 time-out
Fri Nov 20 13:44:31 2009 Fri Nov 20 13:44:31 2009 Critical (3) DHCP WARNING - Non-critical field invalid in response.
Time Not Established Time Not Established Critical (3) No Ranging Response received - T3 time-out
Fri Nov 20 13:44:05 2009 Fri Nov 20 13:44:05 2009 Critical (3) Resetting the cable modem due to docsDevResetNow

[Ignitionnet]

Pretty much, any issues? If not don't worry too much.

[on in an hour!]

downstream receive power level generally should be set at 0 to -5db but as broadbandings said,if youve no issues it looks ok. ;)

[Ignitionnet]

Downstream receive has a nice wide working range, 0 is ideal but there's usually a decent range to go to. The chap's downstream type is especially accommodating.

My 50 is running at +8 - +9dBmV quite happily at the moment.

[on in an hour!]

Downstream receive has a nice wide working range, 0 is ideal but there's usually a decent range to go to. The chap's downstream type is especially accommodating.

My 50 is running at +8 - +9dBmV quite happily at the moment.

its just a rule of thumb we use on faults b.bings...0 to +5db for 50meg...0 to -5db on 10 and 20meg..we know there are +/- tolerances but if we aim for the best nearest we are doing all we can to improve consistencey in connectivity (that and tightening all the loose f's!!!) ;)

[Ignitionnet]

Fairy snuff.

Why the difference between the two OIAH if both are using the same modulation and signal type?

[on in an hour!]

dont know b.bings,just what weve been told to look for!! ;)