PDA

View Full Version : What does this mean?

Hazanko
21-09-2009, 23:33
Mon Sep 21 16:26:59 2009 Mon Sep 21 16:26:59 2009 Information (7) Authorized
Mon Sep 21 16:26:59 2009 Mon Sep 21 16:26:59 2009 Error (4) Config file does not include a valid CVC!
Mon Sep 21 16:26:59 2009 Mon Sep 21 16:26:59 2009 Information (7) Registration complete!
Mon Sep 21 16:26:59 2009 Mon Sep 21 16:26:59 2009 Information (7) We registered with a DOCSIS 1.0 config file!
xocemp
22-09-2009, 00:14
Mon Sep 21 16:26:59 2009 Mon Sep 21 16:26:59 2009 Information (7) Authorized
Mon Sep 21 16:26:59 2009 Mon Sep 21 16:26:59 2009 Error (4) Config file does not include a valid CVC!
This failed its TLV-32, meaning it failed to download a upgrade image/bin file. This is normal since the modems have locked firmware.
Mon Sep 21 16:26:59 2009 Mon Sep 21 16:26:59 2009 Information (7) Registration complete!
Mon Sep 21 16:26:59 2009 Mon Sep 21 16:26:59 2009 Information (7) We registered with a DOCSIS 1.0 config file!
v0id
22-09-2009, 00:48
it means if your internet connection is working, there's no need to go poking about the config pages
Hazanko
22-09-2009, 01:00
Thanks, is there anyway to check if i'm on docsis 3.0?.
xocemp
22-09-2009, 01:02
http://www.cableforum.co.uk/board/misc.php?do=connection

Clicky, post the "Host" delete out the IP address though ;)

If your a 50Mbit customer you will be.
If your a 20Mbit customer you maybe.
10Mbit and below, very doubtful.
Hazanko
22-09-2009, 01:04
cable.ubr01.sprt.blueyonder.co.uk
xocemp
22-09-2009, 01:09
Legacy kit would be say ubr01.sprt to ubr11.sprt and anything there after being overlay kit 10k & BSR. Being on ubr01.sprt I'd say your still on the legacy VXR.
broadbandking
22-09-2009, 01:51
Mon Sep 21 16:26:59 2009 Mon Sep 21 16:26:59 2009 Information (7) Authorized
Mon Sep 21 16:26:59 2009 Mon Sep 21 16:26:59 2009 Error (4) Config file does not include a valid CVC!
Mon Sep 21 16:26:59 2009 Mon Sep 21 16:26:59 2009 Information (7) Registration complete!
Mon Sep 21 16:26:59 2009 Mon Sep 21 16:26:59 2009 Information (7) We registered with a DOCSIS 1.0 config file!

Your on DOCSIS 1.0 if you was on the new kit then you should have seen a log registering you to a DOCSIS 1.1 file.

Which means your on the old equipment.
xocemp
22-09-2009, 01:53
Hi bbk,
There are DOCSIS 1.0 modems/ with 1.0 configs on 10k & BSR's.