View Full Version : New Driver for 50Mbit Wireless N USB Adapter
If you are using the Netgear Wireless 'N' Adapter supplied by Virgin as part of the XXL broadband you need to update the drivers to get the best performance
http://www.virginmedia.com/driverupdate
cheers
Will give this a go when I get home tonight - up until now, this adapter has been as about much use as a one-legged man in an arse-kicking competition
Stabhappy
26-02-2009, 16:18
I'd love to hear just how much of an improvement this offers, if any?
virgin need to tell custmers you must use WPA2 securty (not sure about when no security) to get 6-8MB/s down the wireless (wep or WPA1 less then 3MB/s avg)
allso the router is setup in 150mbs mode default, there is 300mbs support But some wireless devices do not work with it as it uses 2 chans to get better speed and it confuse some devices (google G1 phone counts as none worky)
tried the new software - can't see any difference in performance at all
still getting poor speeds unless I'm on top of the wireless router
leexgx - didn't know about the WPA2 setting requirement (the installer this week just set it up with WPA1) - will try that tonight
tweetiepooh
27-02-2009, 09:25
Note that N kit degrades speed very close to the router, you need to be a couple of metres away. (At least that was the case with the early pre-N that I have).
with the new software, and changing to WPA2 on the router, still no difference (and still cocks up my native wireless settings when I remove the dongle's software)
the porter
02-03-2009, 19:30
also make sue it is aes not tkip i noticed a massive diffence in speed when changing to this, but saying that my inbuilt card is now dl around 44 meg wirelessly using wpa 2 aes
Yup I'm pretty sure it's AES encryption 'N' needs otherwise it falls back to 'G' speeds
also make sue it is aes not tkip i noticed a massive diffence in speed when changing to this, but saying that my inbuilt card is now dl around 44 meg wirelessly using wpa 2 aes
I assume AES is a setting that is enabled via the router setup? Or by the dongle setup?
the porter
03-03-2009, 09:21
yes mate its in your router set up
yes mate its in your router set up
cheers
just seen my router already set to AES - so I guess that's not the problem
vBulletin® v3.8.11, Copyright ©2000-2024, vBulletin Solutions Inc.