How long does it take for Virgin media to update the broadband speed? [Archive]

cogoni

20-10-2008, 22:50

I just upgraded the speed to 10meg, but i tested the speed and its still 2meg.
I rebooted the modem, but still. Earlier on the speed was kinda up and down, but now its stuck at 2meg.

weemax

21-10-2008, 01:04

10-15mins iirc

esdxc37

21-10-2008, 10:03

If you are not getting the speed unplug modem completley from the socket leave for 30 seconds then plug in again. Sometimes needs this.

xspeedyx

21-10-2008, 15:02

logg at your modem config page aswell 192.168.100.1 username and password is root root

whydoIneedatech

21-10-2008, 15:39

logg at your modem config page aswell 192.168.100.1 username and password is root root
If he is Telewest it will not show as we are now coded.

xspeedyx

22-10-2008, 14:05

but the bit rate would help us to determine his speed like mine does

Downstream Channel
The data shown in the table below provides information about the signal coming from the network to your cable modem.

Downstream Status
Operational

Channel ID
7

Downstream Frequency
339000000 Hz

Modulation
256QAM

Bit Rate
20480000 bits/sec

Power Level
0.8 dBmV

Signal to Noise Ratio
34.4 dB

Upstream Channel
The data shown in the table below provides information about the signal being transmitted to the network from your cable modem.

Upstream Status
Operational

Channel ID
3

Upstream Frequency
37500000 Hz

Modulation
QPSK

Bit Rate
768000 bits/sec

Power Level
55.5 dBmV

whydoIneedatech

22-10-2008, 22:44

but the bit rate would help us to determine his speed like mine does

Downstream Channel
The data shown in the table below provides information about the signal coming from the network to your cable modem.

Downstream Status
Operational

Channel ID
7

Downstream Frequency
339000000 Hz

Modulation
256QAM

Bit Rate
20480000 bits/sec

Power Level
0.8 dBmV

Signal to Noise Ratio
34.4 dB

Upstream Channel
The data shown in the table below provides information about the signal being transmitted to the network from your cable modem.

Upstream Status
Operational

Channel ID
3

Upstream Frequency
37500000 Hz

Modulation
QPSK

Bit Rate
768000 bits/sec

Power Level
55.5 dBmV
But you are on an Ambit and only they show the bit rate on the Telewest side.:D

browney

23-10-2008, 03:35

It was instant for me

whydoIneedatech

23-10-2008, 22:57

But you are on an Ambit and only they show the bit rate on the Telewest side.:D
I made an error they also show in the Webstars as well, have a week off and my mind goes................blank:dunce::p: