View Full Version : Seeing CM config page behind router..
Had my CM replaced today (power adapter blew, apparently they don't have adapters for the Terayons anymore so had to have new CM).
I was wondering how you see the CM config pages whilst behind a router?
I have a d-link 802.11g 4 port router (DI-524 is the model)
Any ideas?
alferret
09-03-2005, 19:36
As long as your not surfing through a proxy via IE
192.168.100.1
User name root
password root
:)
Just put in the all important IP address and it will go through to the cable modem as normal ;) Well it does here anyway LOL
http://192.168.100.1 :)
__________________
As long as your not surfing through a proxy via IE
192.168.100.1
User name root
password root
:)
Was just about to question the user name and password till they magically change lol ;)
Already tried that to no avail :(
(not going through any proxies or anything..)
What happens when you put the ip address in? Are you sure that the router hasn't been told to forward certain traffic :confused:
Few questions, what browser are you running, what model cable modem is it and what router have you got?
CM = Home 200
Router = D-Link DI-524
When I go to the page, it just times out..
Pings also time out.
CM = Home 200
Router = D-Link DI-524
When I go to the page, it just times out..
Pings also time out.Try disabling the "Advanced Firewall" features of your DI-524.
OinkyBoinky
10-03-2005, 18:17
As long as your not surfing through a proxy via IE
192.168.100.1
User name root
password root
:)
While i was tryin to get my modem to work, i was playing around and noticed u also telnet into the modem as well as using a web browser... but wot's the username/password for connecting via telnet? admin:admin and root:root didn't seem to work...
I have the old surfboard modem (must get a new one :D) and I know with it, you cannot access the Config page behind a router unless you plug the modem into one of the LAN Ports, plugged into the WAN port the router denies access, hope this helps.
I also have a Surfboard modem and you can access the CM config page if you put your pc into the DMZ
badnbusy
11-03-2005, 15:54
Reboot the modem, wait for all lights to settle and then the page http://192.168.100.1 will be become available again. This happens to a lot of people. The modem only seems to let you access its diagnostics for about 10 minutes after its been rebooted :(
Reboot the modem, wait for all lights to settle and then the page http://192.168.100.1 will be become available again. This happens to a lot of people. The modem only seems to let you access its diagnostics for about 10 minutes after its been rebooted :(
i believe this is only an issue for the ambit 200 models
vBulletin® v3.8.11, Copyright ©2000-2024, vBulletin Solutions Inc.