You are here: Home | Forum | Ethernet Card Installation
You are currently viewing our boards as a guest which gives you limited access to view most of the discussions, articles and other free features. By joining our Virgin Media community you will have full access to all discussions, be able to view and post threads, communicate privately with other members (PM), respond to polls, upload your own images/photos, and access many other special features. Registration is fast, simple and absolutely free so please join our community today.
Services: V+/vbox - BT Anytime - O2 16meg (for now, when it goes live until then vm 20meg)
Posts: 453
Ethernet Card Installation
Afternoon all...first time post blah blah blah.....
Just purchased a new ethernet card for connecting 250 modem to as using usb at the mo, my question is that i know that xp should detect and install the appro drivers for the card, but will i need to uninstall the original setup as it was set up and configured for usb use or do i not need to bother......advice appreciated as i might be liable to start it if things go wrong and i need to start messin.
XP may not pick up the drivers for the ethernet card automatically.
Once you have it installed you should be able to power down the pc and modem connect the ethernet cable, then turn on the modem and let the lights settle down and then powerup the pc. It should auto pick up the ip and all will be good.
---------- Post added at 13:13 ---------- Previous post was at 13:11 ----------
Quote:
Originally Posted by grandmaster
On an STB you have to register your MAC address so in that particular case it would need you to go though the "setup" procedure.
Fit the new card into the PC. When the PC is booted up, by the time your windows desktop appears you should get a message of new hardware detected and it will want to lad drivers. Put the driver CD you get twith the card into your CD ROM and make sure the driver finding message is allowed to search the CD. Once the card is detected and drivers loaded, tun off your PC and the modem / STB.
Now unplug all the USB connnections, plug in the ethernet connections. Power up the modem / STB (let it settle), boot up the PC. If a modem the PC should now be ready to use the internet connection. If a STB you need to go through the registration process.
__________________
The NTHW Gaming Clan! ~ Call of Duty Gameservers and More!
Services: V+/vbox - BT Anytime - O2 16meg (for now, when it goes live until then vm 20meg)
Posts: 453
Re: Ethernet Card Installation
Thanks guys.....
Forgot to post that the bleeding thing won't be here 'til tuesday (online shopping, who needs it........well i did cos it was cheeeep, maybe thats why the drivers are coming on floppy not cd ).
More often than not it's easier to get new drivers (if needed at all) from the manufacturers site. Either way they usually install without too many problems.
Join CF
You are here: 
it if things go wrong and i need to start messin.
).
