[Paul]

Did you power the PC and SACM or STB down prior to plugging everything in to the router/ PC?

---------- Post added at 10:32 ---------- Previous post was at 10:28 ----------

Originally Posted by Chris T

OK ... do you know the IP address of the router config screen (should be in the set-up documentation)?

Originally Posted by the manual

Activate your browser, and disable the proxy or add the IP address of this product into the
exceptions. Then, type this product’s IP address in the Location (for Netscape) or Address (for IE)
field and press ENTER. For example: http://192.168.123.254.
After the connection is established, you will see the web user interface of this product. There are two
appearances of web user interface: for general users and for system administrator.
To log in as an administrator, enter the system password (the factory setting is ”admin”) in the
System Password field and click on the Log in button. If the password is correct, the web appearance
will be changed into administrator configure mode. As listed in its main menu, there are several
options for system administration.