Can't get online with new Ambit modem - Page 2

grahalex · 14-05-2008, 20:05

She is running XP Home,NIC is listed in device manager, the NIC leaflet she has says it's an SMC one and device manager says it's a Realtek RTL familyfast one.Done IPCONFIG, no joy.

moaningmags · 14-05-2008, 23:49

If she has windows xp service pack 2
go to start run type cmd
ok that get black window
type netsh winsock reset
press enter
should get message saying successfully reset the winsock catalog you now need to restart your machine.
Reboot comp, a lot of the times this will fix the issue.
If service pack 1 you'll need a full winsock fix, the way to do it can be found on Microsoft.

HTH
Mags

grahalex · 15-05-2008, 07:14

I have downloaded winsockxp fix, will this be ok to use ?

Also when I reset IP address it cam out starting 169. not 192.

**Kymmy** · 15-05-2008, 14:18

For the latest drivers and winsock try here, remove and reinstall the card and drivers before doing anything else.

http://www.realtek.com.tw/downloads/...&GetDown=false

If you're getting the 169.x.x.x ip that mewans it's not getting the IP address from the modem which probably should be a 82.x.x.x address (unless youre going through a router)

Try reseting the modem and then restarting the PC.

Kymmy

grahalex · 15-05-2008, 17:01

Thanks for that Kymmy, do I need the auto installation (1st one )drivers or windows XP ( 3rd one ).

The connection isn't going through a router.

I have reset the modem, unplugged it, a couple of times, no luck,

**Kymmy** · 15-05-2008, 19:07

The autoinstall ones normally install diagnostic and other things along with the drivers, the XP ones will be purely drivers...so take your choice

Kymmy

grahalex · 16-05-2008, 07:17

Tried Moaningmags winsock reset without success, still getting IP addess starting 169.

Will try Kymys suggestion next time I'm at MIL's house.

**Graham M** · 16-05-2008, 07:34

Quote:

Originally Posted by whydoIneedatech

The 256 is an Ethernet only modem and will not work with a adapter for it to work with USB it would require drivers, and the are no USB drivers available for that modem so you need to bin the adapter.

The only real solution is to go to your local PC store and purchase a Network Interface Card for around about £15 and install it, then she will get online.

What a load of rubbish.

The USB Adaptor was/is just a Network Interface that plugs into the USB Port, I gave mine away to my granddad to network his 2 PCs as I just used a router from the start.

The OP has said there is already a network card in the PC so there is no need to go and buy another, if neither the USB Adapter nor the Network card has been able to pick up an IP address there is an apparent software issue.

**Kymmy** · 16-05-2008, 09:42

You could also in the mean time try setting the IP address on the NIC to 192.168.100.2 and the subnet to 255.255.255.0 and then try talking to the modem by entering http://192.168.100.1 into the browser...If that works then the ethernet is fine and it's the dhcp on the modem not working.

Kymmy

grahalex · 16-05-2008, 22:43

Hi Zeph, which software do you think needs sorting out ?

grahalex · 20-05-2008, 20:14

Mother in law got a visit from a Vigin Media engineer yesterday, fitted a new modem, still couldn't get online, he said modem was too far away from PC.PC is upstairs, modem is downstairs next to V+ box.It's connected to PC by Ethernet cable, going out of house, up the side of house and in upstairs.The old modem worked ok with this set up, the engineer said he would have to fit a white cable modem cable upstairs for it to work. He was in a bit of a rush and left it at that. What do you think about this idea ?

Jonnymeg · 20-05-2008, 20:41

Quote:

Originally Posted by grahalex

Mother in law got a visit from a Vigin Media engineer yesterday, fitted a new modem, still couldn't get online, he said modem was too far away from PC.PC is upstairs, modem is downstairs next to V+ box.It's connected to PC by Ethernet cable, going out of house, up the side of house and in upstairs.The old modem worked ok with this set up, the engineer said he would have to fit a white cable modem cable upstairs for it to work. He was in a bit of a rush and left it at that. What do you think about this idea ?

Can't see it. i think he was stumped too.

What area do you live in?

grahalex · 20-05-2008, 20:48

Leeds

**Stuart C** · 20-05-2008, 22:03

Quote:

Originally Posted by grahalex

Mother in law got a visit from a Vigin Media engineer yesterday, fitted a new modem, still couldn't get online, he said modem was too far away from PC.PC is upstairs, modem is downstairs next to V+ box.It's connected to PC by Ethernet cable, going out of house, up the side of house and in upstairs.The old modem worked ok with this set up, the engineer said he would have to fit a white cable modem cable upstairs for it to work. He was in a bit of a rush and left it at that. What do you think about this idea ?

Probably not true (although that doesn't help). Given a good quality cable, Ethernet is designed to work with lengths of up to 100 metres. The standard specifies this. Given good conditions and excellent quality cable, it can go to 120 or 130 metres.

Even on cheap cables, I've seen Ethernet working over lengths of 20-30 metres.

grahalex · 21-05-2008, 04:49

By the sound of it he was miffed because he kept having to go upstairs to PC and back down to do unplug/plug in cables, just like I've been doing everytime I have rung help desk.