Cable Forum - View Single Post

**Rob M** · 30-05-2005, 23:20

The trick will be to make sure that he doesn't get your new IP address.

Whatever you did before that gave him access to it, don't do it again!

If he gained access to it through a forum that you used it might be wise to let the Mods/Admins at that forum (or at least the Forum Owner) know that he is abusing the powers that he has and mis-using the information. They have a legal requirement to protect that information.

It's also worth pursuing this matter with NTL, he's abusing the network and also (I suspect) committing a criminal act through what he is doing to you.
__________________

If it's a WRT54G

Open a new browser window.

In the address bar type 192.168.1.1 and hit go.

Now you will be asked to input the username and password that you put in when you set the router up. If you didn't change them then the default will be admin and Admin I think (check your instruction manual though).

Once you are in go to Setup > MAC address clone

You can enter any MAC address you like here, or clone that of your PC, not sure what you should put in but I'm sure that MB will be able to give you an idea. After you've put in whatever you need to click on Save Settings to apply the changes.

Once this is done you will probably need to reboot everything, again I would wait for confirmation from MB as there may be some special steps.

<EDIT: The default password is admin (all lower case) there is no default username so leave that blank>

30-05-2005, 23:20	#9
Rob M Cable Forum Team Join Date: Feb 2004 Location: /root/ Age: 31 Services: netstat -tula > /home/raistlin/netstat.txt Posts: 8,469	Re: DOS Attacks The trick will be to make sure that he doesn't get your new IP address. Whatever you did before that gave him access to it, don't do it again! If he gained access to it through a forum that you used it might be wise to let the Mods/Admins at that forum (or at least the Forum Owner) know that he is abusing the powers that he has and mis-using the information. They have a legal requirement to protect that information. It's also worth pursuing this matter with NTL, he's abusing the network and also (I suspect) committing a criminal act through what he is doing to you. __________________ If it's a WRT54G Open a new browser window. In the address bar type 192.168.1.1 and hit go. Now you will be asked to input the username and password that you put in when you set the router up. If you didn't change them then the default will be admin and Admin I think (check your instruction manual though). Once you are in go to Setup > MAC address clone You can enter any MAC address you like here, or clone that of your PC, not sure what you should put in but I'm sure that MB will be able to give you an idea. After you've put in whatever you need to click on Save Settings to apply the changes. Once this is done you will probably need to reboot everything, again I would wait for confirmation from MB as there may be some special steps. <EDIT: The default password is admin (all lower case) there is no default username so leave that blank> __________________ Formerly known as 'Raistlin' Pausing Live TV and Eating Wotsits Last edited by Rob M; 30-05-2005 at 23:23.