Quote:
Originally Posted by ntluser
When you say video do you mean VCR? Usually when you have a VCR and insert a video it will auto-select a free channel without interfering with your terrestrial settings.
Have you tried turning the TV off completely i.e. removing the power for say 30 seconds?
The TV should auto-adjust to everything you have attached to it.
|
Thanks for that - I've just tried your suggestion but to no avail I'm afraid - Still just blue screens from scart. Keep 'em coming, I can't believe the TV's had it, everything else works great.
---------- Post added at 18:00 ---------- Previous post was at 17:57 ----------
Quote:
Originally Posted by ntluser
Another possibility is to check out the SCARTS in your TV manual as all SCART sockets do not have the same properties.Some support RGB, some only support composite.
Also if you use a switcher they tend only to provide composite signals and not RGB, which may make a difference.
Hope this helps.
|
Hi - Thanks - However it was setup it was fine for about a year using these cables etc, only recent events seem to have changed anything. Is it possible I've changed a setting which would affect the input of the scarts on the TV - As I say, if I substitute the TV for another everything works perfectly - so it must be the TV somehow