Cable Forum - View Single Post

swapshop1 · 16-01-2008, 19:17

Thinks its solved!! = the inner conductor of the coaxial extension cable is rather thin gauge copper. I noticed that one connector made the picture flicker when I waggelled it. I put a small kink in the conductor, a slight bend so that when it was inserted into the female socket and screwed up, that the conductor would press against the inside of the hole. If you follow. I guessed that it was not contacting properly.

I'm adding this so that others can search for a solution.

16-01-2008, 19:17	#8
swapshop1 cf.member Join Date: Aug 2005 Location: Lincoln Posts: 84	Re: V+ Signal level with new cable Thinks its solved!! = the inner conductor of the coaxial extension cable is rather thin gauge copper. I noticed that one connector made the picture flicker when I waggelled it. I put a small kink in the conductor, a slight bend so that when it was inserted into the female socket and screwed up, that the conductor would press against the inside of the hole. If you follow. I guessed that it was not contacting properly. I'm adding this so that others can search for a solution.